PORT PLATE 0950109 - Caterpillar

Illustration 1 g00562248
Illustration 2 g00562262
Illustration 3 g00562286
104-1752 Piston Pump is for (PIN: 8BL) machines. 100-6239 Piston Pump is for (PIN: 7TL) machines.The rotation of the pump shaft is clockwise when the pump shaft is viewed from the drive end.Type of pump: Axial pistonUse SAE 10W oil at 65°C (150°F) in order to test the pump.Test at Full Speed: Output ... 240 L/min (63 US gpm) Pressure ... 690 kPa (100 psi) Speed ... 1900 rpm Output ... 228 L/min (60 US gpm) Pressure ... 6900 kPa (1000 psi) Speed ... 1900 rpmTest at Half Speed: Output ... 120 L/min (32 US gpm) Pressure ... 690 kPa (100 psi) Speed ... 950 rpm Output ... 114 L/min (30 US gpm) Pressure ... 6900 kPa (1000 psi) Speed ... 950 rpm (1) Torque for plug ... 101.5 4.5 N m (75 4 lb ft) (2) Torque for four bolts ... 34 3 N m (25 2 lb ft) (3) Use 9S-3263 Thread Lock Compound on threads. Torque for four bolts ... 34 3 N m (25 2 lb ft) (4) Torque for two screws ... 4.0 0.4 N m (35 4 lb in) (5) Torque for three screws ... 8.5 1 N m (76 9 lb in) (6) Use 9S-3263 Thread Lock Compound on threads. Torque for rod ... 79 4 N m (58 3 lb ft) (7) Torque for four plugs ... 12.85 0.15 N m (114 2 lb in) (8) If necessary, change the shim in order to achieve the proper initial clearance. ... .0004 to .0039 inch (.0004 to .0039 inch) (9) Use 9S-3263 Thread Lock Compound on threads. Torque for rod ... 79 4 N m (58 3 lb ft) (10) Torque for four bolts ... 115 12 N m (85 9 lb ft) (11) Torque for two bolts ... 286 29 N m (210 22 lb ft) (12) Torque for plug ... 79 4 N m (60 3 lb ft)Compensator Valve
Illustration 4 g00562297
Settings for Pressure Pressure cutoff ... 26200 500 kPa (3800 72 psi) Output ... 5 L/min (1.3 US gpm) Margin pressure ... 2100 150 kPa (305 22 psi) Standby pressure (minimum) ... 2100 kPa (305 psi) Output ... 120 12 L/min (31.7 3.2 US gpm) Test pressure ... 15000 kPa (2175 psi) (1) Torque for needle valve ... 6.7 0.7 N m (5 .5 lb ft) (2) Torque for locknut ...