2032210 POST Caterpillar parts
10 FT, 10B, 8 FT, AP-800C, BG-225B, BG-2455C
Rating:
Alternative (cross code) number:
CA2032210
203-2210
2032210
CA2032210
203-2210
2032210
Weight: 8 pounds 3 kg.
ASPHALT PAVER, ASPHALT SCREED,
Compatible equipment models: 2032210:
Number on catalog scheme:
3
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite C5A Copper Anti Seize -
Illustration 1 g03476222
Install seals (10) into sleeve assembly (9). Apply clean hydraulic oil into seals (10).
Illustration 2 g03443501
Use a suitable lifting device to reposition the head assembly as shown. Refer to Table 2 for the approximate weight of the head assembly. Apply clean hydraulic oil to seals before installing sleeve assembly (9) into the head assembly.
Table 2
Sales Model Head Assembly
Approximate Weight
H35E 27 kg (60 lb)
H45E 35 kg (77 lb)
Illustration 3 g03443502
Install piston (8).
Illustration 4 g03470600
Apply clean hydraulic oil to the seals. Install internal seals (7). Install external seals (6) into seal carrier (5).
Illustration 5 g03443517
Install seal carrier (5) on the head assembly.
Illustration 6 g03479645
Install valve body (4).Note: Make sure valve body (4) is seated against the head before bolts (3) are installed. Damage may occur if Tooling (A) gets into the head assembly.
Apply Tooling (D) to the shoulder of bolts (3). Install bolts (3). Tighten bolts (3) to a torque of 100 N m (74 lb ft) in a cross pattern. Tighten bolts (3) in a cross pattern to a final torque of 240 N m (177 lb ft).
Illustration 7 g03479609
Install plug (2) and the O-ring seal. Charge the low-pressure valve body. Refer to Testing and Adjusting, "Charging the Valve Body with Nitrogen (Low Pressure)" for the correct charging procedure.
Illustration 8 g03479740
Install plug (1) and the O-ring seal.End By:
Install the tool bushing.
Install the hydraulic hammer.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite C5A Copper Anti Seize -
Illustration 1 g03476222
Install seals (10) into sleeve assembly (9). Apply clean hydraulic oil into seals (10).
Illustration 2 g03443501
Use a suitable lifting device to reposition the head assembly as shown. Refer to Table 2 for the approximate weight of the head assembly. Apply clean hydraulic oil to seals before installing sleeve assembly (9) into the head assembly.
Table 2
Sales Model Head Assembly
Approximate Weight
H35E 27 kg (60 lb)
H45E 35 kg (77 lb)
Illustration 3 g03443502
Install piston (8).
Illustration 4 g03470600
Apply clean hydraulic oil to the seals. Install internal seals (7). Install external seals (6) into seal carrier (5).
Illustration 5 g03443517
Install seal carrier (5) on the head assembly.
Illustration 6 g03479645
Install valve body (4).Note: Make sure valve body (4) is seated against the head before bolts (3) are installed. Damage may occur if Tooling (A) gets into the head assembly.
Apply Tooling (D) to the shoulder of bolts (3). Install bolts (3). Tighten bolts (3) to a torque of 100 N m (74 lb ft) in a cross pattern. Tighten bolts (3) in a cross pattern to a final torque of 240 N m (177 lb ft).
Illustration 7 g03479609
Install plug (2) and the O-ring seal. Charge the low-pressure valve body. Refer to Testing and Adjusting, "Charging the Valve Body with Nitrogen (Low Pressure)" for the correct charging procedure.
Illustration 8 g03479740
Install plug (1) and the O-ring seal.End By:
Install the tool bushing.
Install the hydraulic hammer.
Caterpillar parts catalog:
Parts post Caterpillar catalog:
5E8741
POST-GUIDE
45, AP-1000, AP-1000B, AP-1050, AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, BG-245C, CB-434, CP-563, CS-323C, PM-565, PM-565B, RM-250C, RR-250, RR-250B, SM-350, SS-250
45, AP-1000, AP-1000B, AP-1050, AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, BG-245C, CB-434, CP-563, CS-323C, PM-565, PM-565B, RM-250C, RR-250, RR-250B, SM-350, SS-250
35, 45, 55, 65E, 75E, 85E, 95E, AP-1055B, AP-1055D, AP-600D, AP-655C, AP-655D, AP-900B, BG-2455C, BG-2455D, BG-260D, BG600D, BG655D, C11, C13, C15, C18, C9, C9.3, CS-323C, CX31-C13I, CX31-C15I, CX31-C...
1022617
POST AS-SEAT
AP-1000B, AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, BG-2455C, BG-245C
AP-1000B, AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, BG-2455C, BG-245C
2026483
POST
10 FT, 10B, 8 FT
10 FT, 10B, 8 FT
1698719
POST AS-SEAT
AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C
AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C
0775533
POST
PR-450C, RR-250
PR-450C, RR-250
0868421
POST AS
AP-200, AP-200B
AP-200, AP-200B
7R3097
POST AS
AP-1000, AP-1050, AP-800
AP-1000, AP-1050, AP-800
3492623
POST AS
789D
789D
8W6213
POST-CENTER
69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D
69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D
4V6173
POST ASSEM.
950, 966C
950, 966C
1456894
POST-GUIDE
PM-465, RM-350B
PM-465, RM-350B
1698719
POST AS-SEAT
AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C
AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C
2026483
POST
10 FT, 10B, 8 FT
10 FT, 10B, 8 FT
1389300
POST-GUIDE
CP-563, CS-533C, CS-563C, CS-573C, CS-583, CS-583C, RR-250
CP-563, CS-533C, CS-563C, CS-573C, CS-583, CS-583C, RR-250
1155654
POST AS
RM-350B, SM-350
RM-350B, SM-350
1022617
POST AS-SEAT
AP-1000B, AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, BG-2455C, BG-245C
AP-1000B, AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, BG-2455C, BG-245C