POTENTIOMETER 6L7003 - Caterpillar

Illustration 1 g06179917
824K machine model shown.
Air conditioner (1) (If Equipped)
Illustration 2 g06192987This message is located inside the cab on the left-hand cab post that is to the left of the operator seat.Read the service manual before maintenance is performed on the air conditioner.Air Conditioner (1) (If Equipped)
These messages are located inside the compartment on the right side of the machine.Read the service manual before maintenance is performed on the air conditioner.
Illustration 3 g06179788
(1A) Air Conditioning Symbol
(1B) R134a (refrigerant type common name)
(1C) Refrigerant amount
(1D) The lubricating oil type for this system is PAG (polyalkylene glycol)
Illustration 4 g06179793
(1E) (1430) - This film is the Global Warming Potential of R134a
(1D) CO2 equivalent
(1G) System CO2 equivalent amount
Illustration 5 g06179807
(1H) If equipped, this film provides the required language translations of the text "Contains fluorinated greenhouse gases" for the European Union greenhouse gas regulation.These messages for the air conditioner system have the appropriate information for the following services: the air conditioner lubricant, the refrigerant charge, and the refrigerant capacity.Wait to Disconnect Lamp (2)
Illustration 6 g03408964This message is located near the battery disconnect switch. The battery disconnect switch is located in the service center in the rear bumper on the left-hand side of the machine.Do not turn off the battery disconnect switch until the lamp has turned off.
Do not turn the battery power disconnect switch off until indicator lamp has turned off. If the switch is turned off when the light is illuminated then the DEF system will not purge and DEF could freeze and cause damage to the pump and lines.
Engine Shutdown (3)
Illustration 7 g02987496This message is attached to the access panel of the service center in the rear bumper on the left-hand side of the machine.The engine shutdown switch is located in the service center compartment behind the access panel.No Step (4)
Illustration 8 g01206181This message is on the top of the access cover to the compartment which is outside of the right-hand window of the cab. This message is also attached to the cover assembly that is located between the back of the operator cab and the front of the engine compartment.This message indicates that personnel should not use these structures as a step.Alternate Exit (5)
Illustration 9 g02105865This message is located inside the cab near the front of the right-hand window.If the primary exit is blocked, the window on the right-hand side may be used as an alternate exit.