POWER TRAIN AR 1765187 - Caterpillar

1765187 POWER TRAIN AR Caterpillar parts IT28G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1765187
176-5187
1765187

Buy POWER TRAIN AR 1765187 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER,

Compatible equipment models: 1765187:

INTEGRATED TOOLCARRIER IT28G Caterpillar

For full view, you need register

Information:

Rework Procedure
TURBOCHARGER REPLACEMENT:
Refer to Disassembly and Assembly, RENR7460.
1. Replace the old turbocharger with the turbocharger that is listed in the Parts Needed.
2. Remove the line going from the Turbocharger to the waste-gate.
3. Using the 5M-6214 Pipe Plug, plug the orifice of the turbocharger as shown in Image1.1.1. Tighten the plug to 16 Nm.
Image1.1.1
3. Install the 1W-4795 Name Plate over the existing turbocharger name plate using a high temp epoxy or equivalent adhesive.
4. Using a scribe, etch the name plate with the part number 384-8812.
CENTER EXHAUST MANIFOLD - INSPECTION AND POSSIBLE REPLACEMENT:
An inspection of the center exhaust manifold must be completed prior to replacement. A picture of the failed manifold must be attached to the SIMS report.
Refer to the following images:
Failed manifold - Image1.3.1
Good manifold - Image1.3.2
If the center exhaust manifold is failed, install a new center exhaust manifold.
Image1.3.1
Image1.3.2
SOFTWARE INSTALLATION:
Upon completing the hardware update, a software update is required.
1. Using Cat ET, flash the ECM with the 381-7272 Software.
2. After completing the Software