3335620 POWER TRAIN AR Caterpillar parts
306
Rating:
Alternative (cross code) number:
CA3335620
333-5620
3335620
CA3335620
333-5620
3335620
MINI HYD EXCAVATOR,
Compatible equipment models: 3335620:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 9U-7078 Cap 1 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00930118
Remove panel (1) .
Remove door (2) .
Illustration 2 g00930119
Disconnect hose (3) .
Illustration 3 g00930121
Disconnect quick coupler (4) and remove clip (5) .
Illustration 4 g00930123
Disconnect hose (6) .
Illustration 5 g00931431
Illustration 6 g00931433
Attach a suitable lifting device to fuel tank (12) .Note: The fuel tank can be removed with fuel in the tank.
Remove bolts (14) in order to remove bracket (15) .
Remove bolts (7) in order to remove bracket (8) .
Remove bolts (9) and the sleeves.
Remove bolts (10) and remove bracket (11) .
Remove bolts (16) and plate (17) .
Illustration 7 g00931439
Lift fuel tank (12) off support (18) in order to disconnect quick disconnect (19). Remove fuel tank (12) .
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 9U-7078 Cap 1 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00930118
Remove panel (1) .
Remove door (2) .
Illustration 2 g00930119
Disconnect hose (3) .
Illustration 3 g00930121
Disconnect quick coupler (4) and remove clip (5) .
Illustration 4 g00930123
Disconnect hose (6) .
Illustration 5 g00931431
Illustration 6 g00931433
Attach a suitable lifting device to fuel tank (12) .Note: The fuel tank can be removed with fuel in the tank.
Remove bolts (14) in order to remove bracket (15) .
Remove bolts (7) in order to remove bracket (8) .
Remove bolts (9) and the sleeves.
Remove bolts (10) and remove bracket (11) .
Remove bolts (16) and plate (17) .
Illustration 7 g00931439
Lift fuel tank (12) off support (18) in order to disconnect quick disconnect (19). Remove fuel tank (12) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts power Caterpillar catalog:
2597956
POWER TRAIN AR
305.5, 306
305.5, 306