POWER GP-HAMMER 3690788 - Caterpillar

Table 1
Parts List For The Guard For The Engine Oil Level Switch    
Item     Qty     Part Number     Description    
1     1     4P-8134     Clip    
2     1     0T-0102     Bolt    
1 5M-2894     Hard Washer    
3     1     9X-6772     Cable Strap    
4     1     217-7046     Guard As    
5     2     0S-0509     Bolts    
2 5M-2894     Hard Washers    
Illustration 1 g00979097
Right side view of the engine oil pan (1) Clip (2) Bolt and Hard Washer (3) Cable Strap (4) Guard As (5) Bolts and Hard Washers
Illustration 2 g00977647
(6) Location of the engine oil level sensor (7) Location of the two existing mounting holes that are already drilled and tapped
Place the guard over the engine oil level switch and align the guard with existing mounting holes (7) that are already drilled and tapped.
Install bolts and washers (5) and tighten the bolts and the washers that mount the guard to the engine oil pan.
Install clip (1) and tighten the clip to the guard with the bolt and washer (3) .
Feed cable strap (3) through the clip and attach the wire harness for the engine oil level switch to the clip.