POWER TRAIN AR 5348332 - Caterpillar

Illustration 9 g02633716
Note: Note the orientation of plate (22) for assembly purposes.
Remove the rotating half of seal assembly (21) and plate (22) from the pump group.
Illustration 10 g02633936
Remove O-ring seal (23) , ring (24) , and spacer (25) from the pump group.
Illustration 11 g02633478
Bend tab down on lock (26) .
Use Tooling (D) in order to remove nut (27) .
Remove lock (26) .
Illustration 12 g02634237
Remove bolts (28) from housing (29) .
Illustration 13 g02634256
Use Tooling (B) in order to remove housing (29) from the pump group.
Illustration 14 g02634827
Remove lip seal (30) and bearing (31) from housing (29) .
Illustration 15 g02634904
Remove adapter (32) and ring (33) from the pump group.
Illustration 16 g02634857
Remove sleeve (34) and the O-ring seal.
Remove clamp assemblies (35) and body half (36) .
Illustration 17 g02634876
Remove the stationary half of seal assembly (37) from body half (36) .
Illustration 18 g03317090
Note: Note the orientation of plate (39) for assembly purposes.
Remove the rotating half of seal assembly (38) and plate (39) from the pump group.
Illustration 19 g02634926
Remove O-ring seal (40) , ring (41) , and spacer (42) from the pump group.
Illustration 20 g02724944
Note: Threads of impeller (43) are RH threads and have been installed using Loctite thread lock.
Raise temperature of impeller (43) near shaft assembly (11) in order to loosen and remove impeller (43) from shaft assembly (11) .
Illustration 21 g02724951
Note: Threads of impeller (44) are LH threads and have been installed using Loctite thread lock.
Raise temperature of impeller (44) near shaft assembly (11) in order to loosen and remove impeller (44) from shaft assembly (11) .
Illustration 22 g03317103
Remove plates (45) from body assembly (46) .