POWER TAKE-OFF GP-FRONT 7W0282 - Caterpillar

Lifting of Generator Sets
Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam, if necessary. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted. Some removals require lifting the fixtures in order to obtain proper balance and safety. Consult your Caterpillar dealer for information regarding fixtures for proper lifting of your complete package.Lifting eyes are designed and installed for the specific arrangement. Alterations to the lifting eyes and/or the engine make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Caterpillar dealer for information regarding fixtures for proper engine lifting.On some enclosed generator sets, it may be necessary to remove a top panel of the enclosure in order to access the lifting eye.
Illustration 1 g01034418The lifting labels are located on the lifting eyes. These labels designate the proper lifting locations for the generator set. Some generator sets may be lifted at the base of the generator set and other generator sets may have a single lifting point on top of the generator set.Engine Lifting with a Fuel Tank
Do not lift the unit with fuel in the fuel tank.