POWER TRAIN OIL LINES 8C4460 - Caterpillar

Removal Procedure
Start By:
Remove the radiator core. Refer to Disassembly and Assembly, "Radiator Core - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Illustration 1 g01391768
Remove seals (1).
Illustration 2 g01391769
Remove bolts (2) and (3). Loosen bolts (4).
Illustration 3 g01391775
Loosen clamp (6). Disconnect hose (8). Remove bolts (7) and radiator bottom tank (5).Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - P80 Rubber Lubricant -
Illustration 4 g01391775
Place radiator bottom tank (5) in position and install bolts (7). Connect hose (8). Tighten clamp (6).
Illustration 5 g01391769
Tighten bolts (4). Install bolts (3) and (2).
Illustration 6 g01391768
Apply Tooling (A) to seals (1). Install seals (1).End By:
Install the radiator core. Refer to Disassembly and Assembly, "Radiator Core - Remove and Install".