2007138 PRECLEANER AS Caterpillar parts
525B, 525C, 535B, 535C, 545, 545C, 938G, 938G II, 950G, 950G II, 950H, 962G, 962G II, 962H, 973C, IT38G, IT38G II, IT62G, IT62G II, IT62H
Rating:
Alternative (cross code) number:
CA2007138
200-7138
2007138
CA2007138
200-7138
2007138
Weight: 6 pounds 2 kg.
INTEGRATED TOOLCARRIER, WHEEL SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Compatible with Idler Pulley for Snapper Models 190-0854 190-0855 190-0867 2007136 2007137 2007138
Generic This idler pulley is designed to maintain proper belt tension and alignment, reducing slippage and wear during operation. It ensures smooth, quiet performance and extends the lifespan of the belt system. Ideal for routine maintenance and replacement, it helps restore optimal performance and reliability for your equipment. || Weight: 0.5, Dimensions: 3.5 x 3.5 x 1.1, Durable construction, smooth operation, resists wear and corrosion, suitable for various belt-driven systems. Easy to install as a direct replacement. Use the shortcut Ctrl+F and paste your model number into the search box to quickly check product compatibility. || Fits for Craftsman models : 532139245 532127783 127783 139245 280770 917.375531 917.375540 917.375541 917.375545 580-05303 580-05305 Fits for Husqvarna models : 532139245 532127783 127783 139245 280770 532139247 532126801 532125404 532125403 532127222 532127221 532124099 532124100 Fits for Poulan models : 530071776 530071775 530071774 530071773 530071771 530071769 530071768 530071739 530071740 530071741 || Fits for MTD models : 532139245 532127783 127783 139245 280770 737-1047 737-1047A 618-05229 618-05229A 756-04002 756-04002A 756-04002B Fits for Toro models : 107-5034 107-5034A 107-5035 107-5035A 108-0565 Fits for Ariens models : 06331800 06331801 06331802 07209200 07092102 07092000 07092101 Fits for Briggs & Stratton models : 697125 697131 697153 697161 697167 697215 697238 697239 697248 697266 792101 792102 792103 Fits for Snapper models : 190-0854 190-0855 190-0867 2007136 2007137 2007138 || Fits for Simpson models : 258-650 Fits for Cub Cadet models : 756-3017 756-3017A 756-3017B 752-04002 752-04002A 752-04002B Fits for Yard Machines models : 532-17-44-10 532-17-44-20 Fits for Sears models : 917.375531 917.375540 917.375541 917.375545 Fits for Homelite models : 200107001 200107002 Fits for Vanguard models : 209-001 Fits for Echo models : 13013210130 Fits for Troy-Bilt models : 917-375531 917-375540
Generic This idler pulley is designed to maintain proper belt tension and alignment, reducing slippage and wear during operation. It ensures smooth, quiet performance and extends the lifespan of the belt system. Ideal for routine maintenance and replacement, it helps restore optimal performance and reliability for your equipment. || Weight: 0.5, Dimensions: 3.5 x 3.5 x 1.1, Durable construction, smooth operation, resists wear and corrosion, suitable for various belt-driven systems. Easy to install as a direct replacement. Use the shortcut Ctrl+F and paste your model number into the search box to quickly check product compatibility. || Fits for Craftsman models : 532139245 532127783 127783 139245 280770 917.375531 917.375540 917.375541 917.375545 580-05303 580-05305 Fits for Husqvarna models : 532139245 532127783 127783 139245 280770 532139247 532126801 532125404 532125403 532127222 532127221 532124099 532124100 Fits for Poulan models : 530071776 530071775 530071774 530071773 530071771 530071769 530071768 530071739 530071740 530071741 || Fits for MTD models : 532139245 532127783 127783 139245 280770 737-1047 737-1047A 618-05229 618-05229A 756-04002 756-04002A 756-04002B Fits for Toro models : 107-5034 107-5034A 107-5035 107-5035A 108-0565 Fits for Ariens models : 06331800 06331801 06331802 07209200 07092102 07092000 07092101 Fits for Briggs & Stratton models : 697125 697131 697153 697161 697167 697215 697238 697239 697248 697266 792101 792102 792103 Fits for Snapper models : 190-0854 190-0855 190-0867 2007136 2007137 2007138 || Fits for Simpson models : 258-650 Fits for Cub Cadet models : 756-3017 756-3017A 756-3017B 752-04002 752-04002A 752-04002B Fits for Yard Machines models : 532-17-44-10 532-17-44-20 Fits for Sears models : 917.375531 917.375540 917.375541 917.375545 Fits for Homelite models : 200107001 200107002 Fits for Vanguard models : 209-001 Fits for Echo models : 13013210130 Fits for Troy-Bilt models : 917-375531 917-375540
QJMLTDWG 32038X Bearing,Tapered Roller Bearing Cone and Cup Set,Tapered Roller Metric Bearings,190mm ID,290mm OD, 64mm Width,2007138
QJMLTDWG Model Number: 32038X; Type: Taper Roller Bearing || Torque Capacity: 190*290*64MM || Structure: Tapered Roller || Material: High carbon chromium bearing steel (fully quenched type) (GCr15); Quantity: 1pc || Coatings: CHROME STEEL
QJMLTDWG Model Number: 32038X; Type: Taper Roller Bearing || Torque Capacity: 190*290*64MM || Structure: Tapered Roller || Material: High carbon chromium bearing steel (fully quenched type) (GCr15); Quantity: 1pc || Coatings: CHROME STEEL
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2007138:
Information:
Air Starting Motor
Note: The maximum air pressure for starting must not exceed 1030 kPa (150 psi).To start the engine at colder temperatures, the following conditions may be necessary:
Maximum air pressure for the starting motor
An additional volume of airElectric Starting Motor
Maintain the proper level of electrolyte in the batteries. Keep the batteries fully charged.To maximize the battery power, heat the battery compartment or store the batteries in a warm location. Typically, batteries only have 50 percent of the capability at −10 °C (14 °F) versus 27 °C (80 °F).Extra battery capacity may be necessary for very cold temperatures.Starting With the Starting Aid Switch
Personal injury or property damage can result from alcohol or starting fluids.Alcohol or starting fluids are highly flammable and toxic and if improperly stored could result in injury or property damage.
Excessive starting fluid can cause piston and ring damage.Use starting fluid for cold starting purposes only.Do not use excessive starting fluid during starting or after the engine is running.
The optional ether starting aid which is located on the control panel is the only system that is recommended for the injection of starting fluid.Perform the procedures that are described in this Operation and Maintenance Manual, "Before Starting Engine" topic (Operation Section).
Turn the Engine Control Switch to the "MAN. START" position. The engine will crank.
Ether will automatically be injected if the following conditions are met:
The "STARTING AID" switch is in the AUTOMATIC position.
The jacket water temperature is less than 21 °C (70 °F). Note: Additional injections may be necessary in order to start the engine. Additional injections may also be necessary in order to achieve low idle.
If additional injection is necessary, toggle the "STARTING AID" switch to the MANUAL position. The ECM will control the amount of ether that is injected.
The "STARTING AID" switch is a momentary switch. To stop the injection, release the "STARTING AID" switch.
Note: The maximum air pressure for starting must not exceed 1030 kPa (150 psi).To start the engine at colder temperatures, the following conditions may be necessary:
Maximum air pressure for the starting motor
An additional volume of airElectric Starting Motor
Maintain the proper level of electrolyte in the batteries. Keep the batteries fully charged.To maximize the battery power, heat the battery compartment or store the batteries in a warm location. Typically, batteries only have 50 percent of the capability at −10 °C (14 °F) versus 27 °C (80 °F).Extra battery capacity may be necessary for very cold temperatures.Starting With the Starting Aid Switch
Personal injury or property damage can result from alcohol or starting fluids.Alcohol or starting fluids are highly flammable and toxic and if improperly stored could result in injury or property damage.
Excessive starting fluid can cause piston and ring damage.Use starting fluid for cold starting purposes only.Do not use excessive starting fluid during starting or after the engine is running.
The optional ether starting aid which is located on the control panel is the only system that is recommended for the injection of starting fluid.Perform the procedures that are described in this Operation and Maintenance Manual, "Before Starting Engine" topic (Operation Section).
Turn the Engine Control Switch to the "MAN. START" position. The engine will crank.
Ether will automatically be injected if the following conditions are met:
The "STARTING AID" switch is in the AUTOMATIC position.
The jacket water temperature is less than 21 °C (70 °F). Note: Additional injections may be necessary in order to start the engine. Additional injections may also be necessary in order to achieve low idle.
If additional injection is necessary, toggle the "STARTING AID" switch to the MANUAL position. The ECM will control the amount of ether that is injected.
The "STARTING AID" switch is a momentary switch. To stop the injection, release the "STARTING AID" switch.
Cat SIS web machinery list:
Parts precleaner Caterpillar catalog:
2007137
PRECLEANER GP
938G, 938G II, 950G, 950G II, 962G, 962G II, IT38G, IT38G II, IT62G, IT62G II
938G, 938G II, 950G, 950G II, 962G, 962G II, IT38G, IT38G II, IT62G, IT62G II
2446603
PRECLEANER GP
950H, 962H, IT62H
950H, 962H, IT62H
2798927
PRECLEANER GP
525C, 535C, 545C
525C, 535C, 545C
2175288
PRECLEANER GP
938G II, 950 GC, 950G II, 950H, 962G II, 962H, IT38G II, IT62H
938G II, 950 GC, 950G II, 950H, 962G II, 962H, IT38G II, IT62H
2446601
PRECLEANER GP
950H, 962H, IT62H
950H, 962H, IT62H
2Q7955
PRECLEANER GP
938G, 950G
938G, 950G
2Q7956
PRECLEANER GP
938G, 950G, 962G
938G, 950G, 962G
2160205
PRECLEANER GP
525B, 535B, 545
525B, 535B, 545
2175289
PRECLEANER GP
938G II, 950G II, 962G II, IT38G II
938G II, 950G II, 962G II, IT38G II
12M 2, 12M 3, 12M 3 AWD, 140G, 140H, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 160H, 160M 2, 160M 3, 160M 3 AWD, 163H, 16H, 320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 322B, 32...
2Q7954
PRECLEANER AS
963B, 963C, 973, 973C
963B, 963C, 973, 973C
2Q7953
PRECLEANER AS
938G, 950G
938G, 950G
120M, 120M 2, 12M, 525D, 535D, 545D, 555D, 924H, 924HZ, 924K, 928HZ, 930K, 938K, M315D, M316D, M318D, M318D MH, M322D, M322D MH
1306857
PRECLEANER AS
315D L, 319D L, 319D LN
315D L, 319D L, 319D LN
2537123
PRECLEANER AS
M313D, M315D, M316D, M318C, M318D, M318D MH, M322C, M322D, M322D MH
M313D, M315D, M316D, M318C, M318D, M318D MH, M322C, M322D, M322D MH
9M1847
PRECLEANER
651, 988, D379
651, 988, D379
2588527
PRECLEANER GP
953D, 963C, 963D, 973C, D5R LGP, D6N
953D, 963C, 963D, 973C, D5R LGP, D6N
1566681
PRECLEANER GP
320C, 953C
320C, 953C
583R, 587R, 826G II, 854G, 980G, 980G II, 992G, D10N, D10R, D10T, D11N, D11R, D11T, D8L, D8N, D8R, D8R II, D9H, D9N, D9R, D9T
904B, 904H, 933C, D10R, D11R, D3G, D4C III, D4G, D9R
2Y9799
PRECLEANER GP
D6D, D6E
D6D, D6E
2Q7954
PRECLEANER AS
963B, 963C, 973, 973C
963B, 963C, 973, 973C