PRECLEANER GP 2085836 - Caterpillar

Illustration 1 g00765896
Captions describe the intent of the illustration.
Illustration 2 g00763487
This illustration is an EXAMPLE. The pin numbers do not represent an actual schematic.General schematic informationNote: J1 refers to the side of a connector that has the pins. P1 refers to the side of a connector that has the sockets.
Illustration 3 g00763496
Example of connectorConnectors are illustrated frequently in order to show pin locations that are used in the tests.Note: This module uses J1:25 in order to refer to a pin location. This means that the pin location that is being referred to is ECM connector J1 and the pin that is being referred to is pin 25. Other publications may refer to this pin location as J1-25 or J1 pin 25.
ELECTRICAL MEASUREMENTSMeasuring Voltage in Switch Circuits
Illustration 4 g00766345
Voltage measurementMeasuring Current in Switch Circuits
Illustration 5 g00784767
Current measurementMeasuring Resistance in Switch Circuits
Illustration 6 g00766359
Resistance measurementTest Step 1. The Procedure to be Performed is Specified HereThis area has the incremental instructions in order to perform the tests.
Follow each step in descending order.Expected Result:The expected results are told here.Results:
OK - This area describes the actual result. Also, the next step in the process is indicated.STOP