PRECOOLER GP 2276754 - Caterpillar

2276754 PRECOOLER GP Caterpillar parts C11, C13

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2276754
227-6754
2276754

Buy PRECOOLER GP 2276754 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

2276754 Microscope Slide 1mm 25x75mm 144 Per Pack sold as Pack Pt# 22034486 by Fisher Scientific Co.

$34.60

12 Jul 2021

Kay Rehab

2276754 Microscope Slide 1mm 25x75mm 144 Per Pack sold as Pack Pt# 22034486 by Fisher Scientific Co.
Fisher Scientific PLEASE NOTE PHOTO MAY NOT REPRESENT ACTUAL ITEM. USE TITLE ONLY || 2276754 Microscope Slide 1mm 25x75mm 144 Per Pack sold as Pack Pt# 22034486 by Fisher Scientific Co.

This part in 1 request: Show. This information for suppliers only!

#683037 2276754

2021-07-12

Number on catalog scheme:

Caterpillar 2276754 Parts scheme PRECOOLER GP

For full view, you need register

Compatible equipment models: 2276754:

TRUCK ENGINE C11 C13 Caterpillar

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14x1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Studs
M12x1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the crankshaft pulley and the front of the crankshaft are clean and free from damage.
Illustration 1 g02717790
Illustration 2 g02717789
Inspect vibration damper (5) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft pulley (4) onto a suitable support.
Install Tooling (D) crankshaft pulley (4) .
Install vibration damper (6) over Tooling (D) .
Install bolts (6) to the crankshaft pulley assembly.Note: Evenly space bolts (6) around the crankshaft pulley assembly.
Tighten bolts (6) finger tight.
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
If the friction shim has not been removed, install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Install crankshaft pulley assembly (2) onto the crankshaft.Note: Do not lubricate the front seal or the seal face of the crankshaft pulley assembly.
Install two Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Tighten bolts (6) to a torque of 115 N m (85 lb ft).
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "V-Belt - Remove and Install" for the correct procedure.