PRESS-100 TON 1U7467 - Caterpillar

Removal Procedure
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03890861
Remove hose tray (1).
Illustration 2 g03890883
Remove bolts (2) and nuts (3). Remove battery hold-down (4).
Illustration 3 g03890897
Disconnect cable assemblies (6) and (7). Remove battery cable assembly (8) and bracket (9). Use two people to remove batteries (5). The weight of batteries (5) is approximately 44 kg (97 lb). Installation Procedure
Install batteries (5) in the reverse order of removal.
Tighten bolts (2) to a torque of 6.8 1.4 N m (60 12 lb in).