PRESSURE UNIT 0944544 - Caterpillar

Illustration 1 g00100945
(A) Windshield Wiper Switch. (B) Switch for the Windshield Washer. (1) Indicator Light. (2) Indicator Light. (3) Indicator Light.
Windshield Wiper (A) - Push the switch in order to activate the windshield wiper. Whenever the switch is depressed, the mode of the windshield wiper will change according to the indicator light that is illuminated. When indicator light (1) is on, the windshield wiper operates intermittently at every five second intervals. When indicator light (2) is on, the windshield wiper operates continuously.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately.Check the cause. If the switch remains on, motor failure can result.
Windshield Washer (B) - Push the switch in order to activate the windshield washer. While the switch is depressed, indicator light (3) will come on and washer fluid will spray from the nozzle. The windshield wiper will also operate while the switch is depressed. After the switch is released for approximately three seconds, the windshield wiper will stop .
If the washers are used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.
Illustration 2 g00110323
Lower Windshield Wiper (If Equipped) - Push down the right half of the switch in order to turn on the lower windshield wiper. Push down the left half of the switch in order to turn off the lower windshield wiper.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately.Check the cause. If the switch remains on, motor failure can result.
Illustration 3 g00100952
Lower Windshield Washer (If Equipped) - Push down the right half of the switch and keep the switch depressed in order to activate the lower windshield washer. While the switch is depressed, the windshield washer fluid will spray from the nozzle. The windshield wiper will also function. When you release the switch, the windshield washer will stop. The windshield wiper will continue to function.
If the washers are used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.