PRESSURE AND SELECTOR VALVE GROUP 9P3049 - Caterpillar

performing any operation or maintenance procedures, ensure that the Safety Information, warnings, and instructions are read and understood.To determine the maintenance intervals, use fuel consumption, service hours, or calendar time, which ever occurs first.Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must be performed. When Required
Battery - Replace
Battery or Battery Cable - Disconnect
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Fuel System - Prime
Daily
Cooling System Coolant Level - Check
Engine Air Cleaner Element (Dual Element) - Clean/Replace
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Clean
Engine Oil Level - Check
Walk-Around Inspection
Every 1000 Service Hours
Engine - Clean
Every 3000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
First 19 000 L (5000 US gal) of Fuel or 250 Service Hours
Engine Valve Lash - Inspect/Adjust
Magnetic Pickups - Clean/Inspect
Every 19 000 L (5000 US gal) of Fuel or 250 Service Hours
Alternator and Fan Belts - Inspect/Adjust/Replace
Battery Electrolyte Level - Check
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Crankcase Breather - Clean
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Fan Drive Bearing - Lubricate
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Water and Sediment - Drain
Hoses and Clamps - Inspect/Replace
Radiator - Clean
PM Level 2 - Every76 000 L (20 000 US gal) of Fuel or 1000 Service Hours
Engine Protective Devices - Check
Fuel Control Linkage - Check/Lubricate
PM Level 3 - Every 228 000 L (60 000 US gal) of Fuel or 3000 Service Hours
Cooling System Coolant (DEAC) - Change
Cooling System Water Temperature Regulator - Replace
Crankshaft Vibration Damper - Inspect
Engine Mounts - Inspect
Engine Valve Lash - Inspect/Adjust
Engine Valve Rotators - Inspect
Turbocharger - Inspect
Every 228 000 L (60 000 US gal) of Fuel or 6000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Every 379 000 L (100 000 US gal) of Fuel or 5000 Service Hours
Alternator - Inspect
Fuel Injection Nozzles - Test/Exchange
Magnetic Pickups - Clean/Inspect
Starting Motor - Inspect
Water Pump - Inspect
Overhaul
Overhaul Considerations