5328966 PROPULSION GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA5328966
532-8966
5328966
CA5328966
532-8966
5328966
Number on catalog scheme:
2
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
D6T Track-Type Tractor XL VPAT, XE; XW VPAT, XE; LGP VPAT, XE D5M00001-UP (MACHINE) POWERED BY C9.3 Engine »
532-8966
PROPULSION GP-ELECTRIC DRIVE
D6T Track-Type Tractor XL, XE; XW, XE; LGP, XE HFE00001-UP (MACHINE) POWERED BY C9.3 Engine »
532-8966
PROPULSION GP-ELECTRIC DRIVE
D6 Track-Type Tractor LRG00001-UP (MACHINE) POWERED BY C9.3 Engine »
532-8966
PROPULSION GP-ELECTRIC DRIVE
D6T Track-Type Tractor XL, XE; XW, XE; LGP, XE B7200001-UP (MACHINE) POWERED BY C9.3 Engine »
532-8966
PROPULSION GP-ELECTRIC DRIVE
Caterpillar parts catalog:
Information:
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01263579
Loosen clamp (1) .
Illustration 2 g01263580
Disconnect hoses (4) and (9) .
Disconnect tube assemblies (3) and (8) .
Remove nuts (5) and reposition tube (2) .
Remove nuts (7) and turbocharger (6) .
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01263579
Loosen clamp (1) .
Illustration 2 g01263580
Disconnect hoses (4) and (9) .
Disconnect tube assemblies (3) and (8) .
Remove nuts (5) and reposition tube (2) .
Remove nuts (7) and turbocharger (6) .
Parts propulsion Caterpillar catalog:
5328965
PROPULSION GP-
Caterpillar
Caterpillar
0787664
PROPULSION P
Caterpillar
Caterpillar
4773210
PROPULSION GP-ELECTRIC DRIVE
Caterpillar
Caterpillar
4796820
PROPULSION GP-ELECTRIC DRIVE
Caterpillar
Caterpillar
4796819
PROPULSION GP-ELECTRIC DRIVE
Caterpillar
Caterpillar
3964854
PROPULSION GP-ELECTRIC DRIVE
D7E, D7E LGP
D7E, D7E LGP