3295955 PROTECTOR-SIDE BAR Caterpillar parts
374D L, 374F L, 375 L, 385B, 390D, 390D L, 990H, 992K
Rating:
Alternative (cross code) number:
CA3295955
329-5955
3295955
CA3295955
329-5955
3295955
Weight: 45 pounds 20 kg.
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 3295955:
Number on catalog scheme:
4
For full view, you need register
Information:
Console Latch (If Equipped) (31)
Console Latch - Pull the console latch toward the operator in order to move the joystick controls toward the operator. Release the console latch. The joystick controls will remain in the desired position. In order to return the joysticks to the stowed position, push the console latch away from the operator, and push the joysticks forward. Release the console latch once the joystick controls are in the stowed position.Fan Switch (33)
Heater Fan Switch - This switch controls the three-speed blower fan motor.Press the bottom of the switch for the LOW position of the fan.Press the switch to the middle position for the MEDIUM fan speed.Press the top of the switch for the HIGH fan speed.Variable Temperature Control (34)
Heating Variable - Turn the knob between COOL (left) and WARM (right). Heating and Cooling Control (35)
Heating - Press the top of the switch to the ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob for the desired temperature. Press the switch to the middle position for the blower OFF position.
Cooling (If Equipped) - Press the bottom of the switch to the air conditioning ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob for the desired temperature. Note: When you are using the cooling system, close all unused vents in order to provide maximum cooling.Pressurizing - When heating or cooling is not desired, pressure inside the cab will help keep dust out.To produce the volume of air that is needed to keep dust out, set the blower fan switch control to LOW, to MEDIUM, or to HIGH. Adjust the temperature control knob to the desired temperature.Defogging - Use the cooling system to remove moisture from the air in the cab. This will prevent moisture from forming on the windows. Press the switch to the air conditioning ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust both control knobs until the moisture level is lowered and the windows are free of moisture.VENTILATION - When heating, cooling, or defogging is not desired, the system can be used in order to provide ventilation. Turn the blower fan switch to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob to the desired temperature.Hydraulic Lockout (36)
Hydraulic Lock Switch - The switch allows the operator to lock the hydraulic controls. Press the switch in order to prevent movement of the pilot operated hydraulic controls. Backhoe Controls (If Equipped) (37)
Refer to Operation and Maintenance Manual, "Controls" for more information.Cab Door (If Equipped)
Illustration 8 g02791861
Cab Doors - Pull the door latch in order to open the door. Open the door all the way to the fully open position. The door will remain in this position. Both doors operate the same way.The doors should be closed while you operate the machine. While the doors are shut, the windows can be opened for
Console Latch - Pull the console latch toward the operator in order to move the joystick controls toward the operator. Release the console latch. The joystick controls will remain in the desired position. In order to return the joysticks to the stowed position, push the console latch away from the operator, and push the joysticks forward. Release the console latch once the joystick controls are in the stowed position.Fan Switch (33)
Heater Fan Switch - This switch controls the three-speed blower fan motor.Press the bottom of the switch for the LOW position of the fan.Press the switch to the middle position for the MEDIUM fan speed.Press the top of the switch for the HIGH fan speed.Variable Temperature Control (34)
Heating Variable - Turn the knob between COOL (left) and WARM (right). Heating and Cooling Control (35)
Heating - Press the top of the switch to the ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob for the desired temperature. Press the switch to the middle position for the blower OFF position.
Cooling (If Equipped) - Press the bottom of the switch to the air conditioning ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob for the desired temperature. Note: When you are using the cooling system, close all unused vents in order to provide maximum cooling.Pressurizing - When heating or cooling is not desired, pressure inside the cab will help keep dust out.To produce the volume of air that is needed to keep dust out, set the blower fan switch control to LOW, to MEDIUM, or to HIGH. Adjust the temperature control knob to the desired temperature.Defogging - Use the cooling system to remove moisture from the air in the cab. This will prevent moisture from forming on the windows. Press the switch to the air conditioning ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust both control knobs until the moisture level is lowered and the windows are free of moisture.VENTILATION - When heating, cooling, or defogging is not desired, the system can be used in order to provide ventilation. Turn the blower fan switch to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob to the desired temperature.Hydraulic Lockout (36)
Hydraulic Lock Switch - The switch allows the operator to lock the hydraulic controls. Press the switch in order to prevent movement of the pilot operated hydraulic controls. Backhoe Controls (If Equipped) (37)
Refer to Operation and Maintenance Manual, "Controls" for more information.Cab Door (If Equipped)
Illustration 8 g02791861
Cab Doors - Pull the door latch in order to open the door. Open the door all the way to the fully open position. The door will remain in this position. Both doors operate the same way.The doors should be closed while you operate the machine. While the doors are shut, the windows can be opened for
Caterpillar parts catalog:
Parts protector Caterpillar catalog:
330B L, 330D L, 336D, 336E, 336E H, 345B, 345B II, 345B L, 350, 365B, 365C, 374D L, 375, 375 L, 5110B, 834G, 834H, 972H, 972K, 973D, 988F, 988F II, 988G, 988H, 990, 990 II, 990H, 990K, 992C, 992D, 992...
3467772
PROTECTOR AS
992K
992K
3467774
PROTECTOR AS
992K
992K
3467775
PROTECTOR AS
992K
992K
374D L, D11N, D11R, D11T
330B L, 330C L, 336D, 345B, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 350, 365B, 365B L, 375 L
3263407
PROTECTOR-SIDE BAR
330C L, 330D L, 336D L, 336D2, 336D2 L, 336E LN, 340D L, 340D2 L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365C, 374D L, 385B, 385C, 385C...
330C L, 330D L, 336D L, 336D2, 336D2 L, 336E LN, 340D L, 340D2 L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365C, 374D L, 385B, 385C, 385C...
345D L, 345D L VG, 365B II, 365C, 365C L, 374D L, 385B, 385C, 385C L, 390D, 390D L
330D L, 345C, 345D, 345D L, 365B, 365B II, 365C, 374D L
390D, 390D L, 390F L
3512426
PROTECTOR AS
992G
992G
3512425
PROTECTOR AS
992G
992G
3295954
PROTECTOR AS
988G, 988H, 988K
988G, 988H, 988K
3390312
PROTECTOR AS
993K
993K
3390311
PROTECTOR AS
993K
993K
3390310
PROTECTOR AS
993K
993K
3467781
PROTECTOR AS
988H
988H
3467780
PROTECTOR AS
988H
988H
3467779
PROTECTOR AS
988H
988H