PROTECTOR GP-SIDE BAR 3295956 - Caterpillar

Gas Engine Rating Pro (GERP)
Illustration 2 g06162733
Navigate to the "ENGINE SELECTION" screen on the left.
Illustration 3 g06162743
Locate and select rating by double-clicking on the rating.
Illustration 4 g06162749
Once the engine is selected, select what output parameters you want in the upper right.
Illustration 5 g06162752
Change the output parameters to ppm and uncorrected O2 to align with a emissions analyzer (TEST-O).
Illustration 6 g06162755
Set up the site results in the bottom right.
Illustration 7 g06162757
Click the "Calculate" button at the bottom.
Illustration 8 g06162764
Select "TECH DATA OUTPUT" on the left to see the datasheets.
Illustration 9 g06162766
Navigate to the site and standard datasheets at the top.
Illustration 10 g06162770
The emissions should be displayed in ppm.The following notes apply to Illustration 9.
12 - Emission data is post Caterpillar provided catalyst, values are dependent on proper engine and catalyst maintenance.
13 - NOx values are the maximum values expected under steady state conditions.
14 - CO, CO2, THC, NMHC, NMNEHC, and HCHO values are "Not to Exceed" levels. THC, NMHC, and NMNEHC do not include aldehydes.
15 - Volatile Organic Compounds (VOCs) as defined in US EPA 40 CFR 60, subpart JJJJ.
16 - Exhaust Oxygen tolerance is 0.2, Lambda tolerance is 0.05.Ratings that include a Caterpillar supplied catalyst (integrated catalyst) will show emissions after the catalyst that should represent Not to Exceed (NTE) values over the life span of the catalyst. To see engine out (pre catalyst emissions) look for a "sister rating" that is labeled as "catalyst setting".