PROTECTOR AS 3801223 - Caterpillar

Illustration 1 g01392582
Typical example
(1) Cover Tighten the bolts evenly in small increases until the following torque is reached: ... 80 N m (60 lb ft) (2) Bolt Torque ... 36 N m (27 lb ft) (3) Bolt Torque ... 78 N m (60 lb ft) (4) Bolt (pinion) Torque ... 110 N m (80 lb ft) (5) Rotor clamp nut Tighten the rotor clamp nut until the following clearance between the rear end plate and the rotor is reached: ... 0.03 to 0.08 mm (0.001 to 0.003 inch)Check the clearance again after the bolt for the rotor clamp nut is tightened. (6) Rotor retainer bolt Torque ... 120 N m (90 lb ft)