parts catalog

PULLER- 1400169 - Caterpillar

1400169 PULLER- Caterpillar parts PULLER
Alternative (cross code) number:
Caterpillar 1400169 PULLER-
Weight: 2 pounds 1 kg.

Buy PULLER- 1400169 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


1. Lift the blade (1) and move it to the right as far as possible, and install blocks under the circle drawbar as shown. 2. Remove ring (3) and pin (2) that fasten the rod end of cylinder in bracket. 3. Install tooling (A) on the right hand side of the circle drawbar and on the left hand side of the blade (1) as shown. 4. Move the blade to the right as far as possible and install tooling (B) and a hoist and remove blade from vehicle. The weight of the blade is 2400 lb. (1089 kg).Install Blade
1. Remove block (2) and wear strip (1) for easier blade installation. 2. Install tooling (A) on blade and move the blade in position on the circle drawbar. 3. Install wear strip (1) and block (2). There must be .005 to .035 (0.13 to 0.89 mm) clearance between the blade and the wear strip. 4. Put the rod end of the cylinder in bracket and install pin (3) and ring (4).

Parts puller Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.