PULLER 2429956 - Caterpillar

Illustration 21 g01817555
Remove the two covers from the top of the new engine.
Illustration 22 g01820323
Install bracket assembly (1) to the frame by using four bolts (2), eight hard washers (3), and four nuts (4) .
Illustration 23 g01820377
Secure bracket assembly (5) to bracket assembly (1) by using three bolts (2), six hard washers (3), and three nuts (4) .
Illustration 24 g01820715
Install tube assembly (6) and tube assembly (7) onto the top of the engine by using two clamps (8) .
Illustration 25 g01853074
Install bellows assemblies (C) that were removed in Step 3 of the ""Remove the Exhaust Pipes"" Section. Use two clamps (D) that were removed in Step 2 of the ""Remove the Exhaust Pipes"" Section in order to secure bellows assemblies (C) to tube assemblies (6) and (7) .
Illustration 26 g01861153
Install tube assembly (9). Secure tube assembly (9) to the muffler by using band clamp (A) that was removed in Step 4 of the ""Remove the Exhaust Pipes"" Section. Secure tube assembly (9) to bracket assembly (5) by using two bolts (11) and two washers (12). Secure tube assembly (9) to bellows assemblies (C) by using one clamp (D) that was removed in Step 2 of the ""Remove the Exhaust Pipes"" Section.
Illustration 27 g01861253
Install tube assembly (13). Secure tube assembly (13) to the muffler by using band clamp (B) that was removed in Step 4 of the ""Remove the Exhaust Pipes"" Section. Secure tube assembly (13) to the bracket assembly by using one clamp assembly (14), one bolt (11) and one washer (12). Secure tube assembly (13) to bellows assembly (C) by using one clamp (D) that was removed in Step 2 of the ""Remove the Exhaust Pipes"" Section.
Illustration 28 g01821160
Install two heat shields (E) that were removed in Step 1 of the ""Remove the Exhaust Pipes"" Section.