PULLER GP-PIN 3731438 - Caterpillar

Function Keys
(2) F4 - Pressing the F4 key will enable the function that is described on the screen directly above this key. When this key is defined on screen to scroll up or down, the Scroll Up and Scroll Down keys will also function the same. (3) F3 - Pressing the F3 key will enable the function that is described on the screen directly above this key. When this key is defined on screen to scroll up or down, the Scroll Up and Scroll Down keys will also function the same. (4) F2 - Pressing the F2 key will enable the function that is described on the screen directly above this key. When this key is defined on screen to scroll up or down, the Scroll Up and Scroll Down keys will also function the same. (5) F1 - Pressing the F1 key will enable the function that is described on the screen directly above this key. When this key is defined on screen to scroll up or down, the Scroll Up and Scroll Down keys will also function the same. (15) RUN - Pressing the "RUN" key causes the EMCP 4.3/4.4 to enter the run mode. (16) AUTO - Pressing the "AUTO" key causes the EMCP 4.3/4.4 to enter the auto mode. (17) STOP - Pressing the "STOP" key causes the EMCP 4.3/4.4 to enter the stop mode or the cool down mode. (18) Escape Key - The escape key is used during menu navigation to navigate up through the menu/submenu structure. Each key press causes the user to move backward (upward) through the menus. The escape key is also used to cancel of data entry screens during set point programming. If the escape key is pressed during set point programming, then none of the changes displayed on the screen will be saved to memory. (21) OK Key - The OK key is used during menu navigation to move forward (downward) through the menu/submenu structure. The key is also used during set point programming to save set points changes. Pressing the OK key during set point programming causes set point changes to be saved to memory.Navigation Keys
(6) Control Key - The control key will navigate the display to the screen that allows the user to monitor and/or adjust various special control features. (9) Main Menu Key - The main menu will navigate the display to the main menu directly without having to navigate out of menus. (14) Event Log - The event log button will navigate the display to the event log. (19) Up Key - The up key is used to navigate up through the various menus or monitoring screens. The key is also used during set point entry. During