PULLER AS- 5493498 - Caterpillar

(1) Install lever against washer (1) to reduce free play.(2) Torque for bolt ... 70 3 N m (50 2 lb.ft.)(3) Free movement of lever must not be more than ... 1.07 mm (.042 in.) The shaft must not slip when 55 3 N m (40 2 lb. ft.) of torque is applied.(4) Thickness of 4M6979 Shim ... 0.13 mm (.005 in.) One shim will change setting ... 12 kPa (1.7 psi)(5) 1K4476 Spring: Length under test force ... 46.84 mm (1.844 in.)Test force ... 210 to 250 N (47.0 to 56.0 lb.)Free length after test ... 63.5 mm (2.50 in.)Outside diameter ... 19.1 mm (.75 in.) Make adjustment with shims to get 1160 70 kPa (168 10 psi) oil pressure to control valves after movement of spools of 7.93 0.25 mm (.312 .010 in.) in either direction.(6) 5J8004 Spring: Length under test force ... 27.7 mm (1.09 in.)Test force ... 60.5 4.4 N (13.6 1.0 lb.)Free length after test ... 33.3 mm (1.31 in.)Outside diameter ... 7.6 mm (.30 in.)(7) 8J4480 Spring (inner): Length under test force ... 37.6 mm (1.48 in.)Test force ... 154 N (34.6 lb.)Free length after test ... 47.2 mm (1.86 in.)Outside diameter ... 24.9 mm (.98 in.)(8) 8J4481 Spring (outer): Length under test force ... 15.5 mm (.61 in.)Test force ... 119 N (26.8 lb.)Free length after test ... 34.5 mm (1.36 in.)Outside diameter ... 33.3 mm (1.31 in.)