PULLER G 5P0944 - Caterpillar

5. Remove the four bolts and the washers from the engine enclosure tube assembly. Using two people remove left hand door assembly (11) from the engine enclosure. The weight of left hand door assembly (11) is 34 kg (75 lb). 6. Remove four bolts (12), the washers, two retainers (14), gasket (17) and oil tube assembly (13) from the adapter, and the valve and the inlet body. Remove retaining ring (16) and O-ring seal (15) from oil tube assembly (13). 7. Remove bolt (19), the washer, and clip (18) from tube assembly (20). 8. Remove six bolts (21) from oil cooler bonnet (22). Set guide assembly (23) aside. 9. Mark and identify six bolts (24) for installation purposes. Remove six bolts (24) and oil cooler bonnet (22) from the torque converter oil cooler. 10. Remove O-ring seal (27), gaskets (25) and (26) from oil cooler bonnet (22). 11. Remove two bolts (32) from cooler outlet elbow (31) and two bolts (30) from valve and inlet body (29). Using two people remove engine oil cooler (28), cooler outlet elbow (31), valve and inlet body (29), and the outlet tube assembly as a unit, from the engine block. 12. Remove three bolts (33) and bolt (34) from engine oil cooler (28). Remove cooler outlet elbow (31), valve and inlet body (29), and outlet tube assembly (35) as a unit, from engine oil cooler (28). 13. Remove cooler outlet elbow (31) from outlet tube assembly (35). 14. Remove O-ring seal (36) from cooler outlet elbow (31). 15. Remove outlet tube assembly (35) from valve and inlet body (29). 16. Remove two O-ring seals (36) from outlet tube assembly (35).
There is spring force against the cover. When the bolts that hold the