PULLER G. 8S7210 - Caterpillar

1. Remove two bolts (1) and magnet assembly (2) from the lift arms.2. Disconnect wire (4).3. Remove bolts (5) and holder assembly (3) from the front main frame. 4. Remove two bolts (6) and switch assembly (7) from the holder. The following steps are for the installation of the lift kickout control.5. Put switch assembly (7) in position in the holder. Install bolts (6) that hold the switch in place.6. Put holder assembly in position and install bolts (5).7. Connect wires (4).8. Put magnet assembly (2) in position and install bolts (1).9. Make an adjustment to the lift kickout. See the Testing And Adjusting Manual.