PULLEY 0057583 - Caterpillar

Illustration 1 g03868703
Table 1
Specification for 450-9408 Cab Door Gp
Item Qty Part Specification Description
1 4 9X-2045 Screw Torque to 5.1 0.3 N m (45.1 2.7 lb in).
2 1 266-3700 Window Wiper Arm Gp Use the following procedure during wiper arm installation:
1. Tighten the wiper arm nut to 17 1 N m (151 9 lb in).
2. Wait for minimum 0.5 hour to maximum 4 hours.
3. Again, tighten the wiper arm nut to 17 1 N m (151 9 lb in).
The tension of the wiper arm in the loaded position is 4.7 0.5 N (1.06 0.11 lb).
3 4 9X-2044 Screw Torque to 6 1 N m (53 9 lb in).
Illustration 2 g03868705
304-4506 Window Wiper Motor Gp
Table 2
Item Qty Part Specification Description
4 - - Use the following procedure to tighten the nut:
If mounted in glass, tighten nut to 5.5 0.5 N m (48.7 4.4 lb in).
If mounted in steel, tighten nut to 9 1 N m (80 9 lb in ).
5 - - Use the following procedure to tighten the nut:
If mounted in glass, tighten nut to 6.5 0.5 N m (57.5 4.4 lb in).
If mounted in steel, tighten nut to 7.5 0.5 N m (66.4 4.4 lb in).
B - - Wiping angle from automatic parking position is 135 2 degrees.