AVSPARE.COM
parts catalog

PULLEY 0876547 - Caterpillar



0876547 PULLEY Caterpillar parts PULLEY
Rating:
61
Alternative (cross code) number:
CA0876547
087-6547
0876547
Caterpillar 0876547 PULLEY

Buy PULLEY 0876547 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01480192
Typical example
Slide locking tab (2) into the unlocked position.
Disconnect harness assembly (3) from inlet manifold pressure sensor (1).
Use a deep socket to remove inlet manifold pressure sensor (1).
Remove O-ring seal (4) from inlet manifold pressure sensor (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01480192
Typical example
Install a new O-ring seal (4) into the groove on inlet manifold pressure sensor (1).
Use a deep socket to install inlet manifold pressure sensor (1). Tighten the inlet manifold pressure sensor to a torque of 10 N m (89 lb in).
Connect harness assembly (3) to inlet manifold pressure sensor (1).
Slide locking tab (2) into the locked position.


Parts pulley Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.