PULLEY 1039443 - Caterpillar

Illustration 1 g03722916
(1) Radio
(2) "MAC ADDRESS"
Record the "MAC ADDRESS" (1) of radio (2).
Use the laptop computer to open the Cat® Networking Devices Manager (NDM) software. Note: Cat Networking Devices Manager is available for download at https://dealer.cat.com.
Illustration 2 g03722917
(2) "MAC ADDRESS"
(3) Select radio
Use the recorded "MAC ADDRESS" (2) to select radio (3). The lower panel of the NDM will then detail the following information for the selected radio:
Location ID is a radio part number
MAC Address AA:BB:CC:DD:EE:FF
Firmware version X-XY.Z
Firmware ID E208.CA.1
IP address is <123.123.123.123>
Select "Essential Config"
Illustration 3 g03722918
(1) Radio
(4) "Diag" indicator
Select the desired Time-out period within the Product identification menu. Note: Diag indicator (4) will flash for the period selected then return to normal operation.
Select Start within the Product identification menu and observe Diag indicator (4) on the front of radio (1).