PULLEY 1352335 - Caterpillar

Use this section for the troubleshooting of problems that have generated event codes but do not have active diagnostic codes. When the event code is generated, the event is active. Any generated code becomes logged in the permanent memory of the Electronic Control Module (ECM).Event codes alert the operator that an abnormal engine operating condition such as low oil pressure or high coolant temperature has been detected. Events do not indicate problems with the electronic system. Event codes also indicate the nature of the problem. Event codes may be viewed on a personal computer that has the software for the Caterpillar Electronic Technician (ET).
Illustration 1 g00740986
Typical example
Illustration 1 indicates output voltage from the coolant temperature sensor. Cat ET can be used to turn these features ON and OFF. When the features are turned ON, the display will appear on an electronic monitoring module and an event will also be logged in the ECM. When the features are turned OFF, the display will not appear on a monitoring module, but an event will still be logged.Programmable Engine Parameters
You can program the engine to perform the following actions for some applications:
Engine shutdown
Engine alarm
Engine derate
Table 1
3500B System Event Codes
Event Code Description
E004 Engine Overspeed Shutdown
E009 High Altitude Derate
E015 High Engine Coolant Temperature Derate
E016 High Engine Coolant Temperature Shutdown
E017 High Engine Coolant Temperature Warning
E038 Low Engine Coolant Temperature Warning
E039 Low Engine Oil Pressure Derate
E040 Low Engine Oil Pressure Shutdown
E100 Low Engine Oil Pressure Warning
E173 High Exhaust Temperature Warning
E190 Engine Overspeed Warning