PULLEY-CRANKSHAFT 1364295 - Caterpillar

Removal Procedure
Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedure.
Illustration 1 g06052537
Remove bolt (8) to allow any residual coolant to drain. Remove clamp (7) and hose (9). Remove bolts (6) and bolts (5). Disconnect nut (3). Remove clamp (2) and tube assembly (4). Remove clamp (1).
Illustration 2 g06052552
Remove bolts (10) and bolt (11). Support aftercooler (13) and remove bolts (12). Remove aftercooler (13).Installation Procedure
Install aftercooler (13) in the reverse order of removal.
Tighten bolts (12) to a torque of 45 4 N m (33 3 lb ft).
Tighten bolt (11) to a torque of 45 4 N m (33 3 lb ft).
Tighten bolts (10) to a torque of 65 10 N m (48 7 lb ft).
Tighten bolt (8) to a torque of 18 3 N m (159 27 lb in).
Tighten bolts (6) to a torque of 23 2 N m (204 18 lb in).
Tighten bolts (5) to a torque of 23 2 N m (204 18 lb in).
Tighten nut (3) to a torque of 80 8 N m (59 6 lb ft).
Tighten clamp (2) to a torque of 3.25 0.25 N m (29 2 lb in).
Tighten clamp (1) to a torque of 3.25 0.25 N m (29 2 lb in).