PULLEY 1M7520 - Caterpillar

1M7520 PULLEY Caterpillar parts 561B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1M7520
1M-7520
1M7520

Weight: 17 pounds 7 kg.

Buy PULLEY 1M7520 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER,

This part in 5 request: Show. This information for suppliers only!

2022-10-15

2022-09-10

2022-09-06

2021-10-19

2021-07-06

Compatible equipment models: 1M7520:

PIPELAYER 561B Caterpillar

Number on catalog scheme: None

For full view, you need register

Information:

Procedure For Overspeed Verification
Start and run the engine at rated speed. Enter service mode. Enter the password. "OP 1" is showing on lower display. See Systems Operation, "Service Mode"for more information. See Systems Operation, "Password Entry OP3" for more information.
Press "SCROLL UP" key eight times. "OP 9" is showing on the lower display.
Press "SELECT" key. The value of overspeed setpoint P10 is showing on the upper display. "SC1" is showing on the lower display. "SC1" is followed by the current engine speed value.
Press "SELECT" key. The setpoint value is flashing on the upper display.
Decrease the value of the setpoint by pressing the "SCROLL DOWN" key. The value is flashing on the upper display. The default setting from the factory is 2120. The setpoint value decreases by 10 rpm with each press of the scroll down key. Continue pressing the key until the value of the setpoint is lower than the present engine speed value. The present engine speed value is showing on the lower display. When the setpoint value is less than the present engine speed value, the engine shuts down. The indicator for engine overspeed will be flashing. The GSC is not in service mode. Procedure For Low Oil Pressure Verification
Note: Service mode cannot be entered when the ECS is in the AUTO position.
Start and run the engine at rated speed. Enter