PULLEY 2099416 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01115921
Remove bolts (1). Remove adapters (2) and the O-ring seals from the flywheel housing.
Remove bolts (3). Remove retainer assemblies (4). Remove idler gears (5).
Illustration 2 g01134262
Remove gear assembly (6) and gear assembly (7) from the flywheel housing.
Illustration 3 g01134263
Use Tooling (A) to remove sleeve bearing (8) from adapter (2).
Illustration 4 g01134250
Remove bolts and cover (9) from the back side of the flywheel housing. Use Tooling (A) to remove sleeve bearing (11) from the flywheel housing.
Remove bolts and cover (10) from the back side of the flywheel housing. Use Tooling (A) to remove sleeve bearing (12) from the flywheel housing.