2389655 PULLEY GP-AUXILIARY DRIVE Caterpillar parts
3024C, C2.2
Rating:
Alternative (cross code) number:
CA2389655
238-9655
2389655
CA2389655
238-9655
2389655
INDUSTRIAL ENGINE,
Number on catalog scheme:
For full view, you need register
Information:
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01047806
Use a suitable lifting device to install gerotor motor (4). The weight of gerotor motor (4) is approximately 24 kg (55 lb). Install gerotor motor (4). Install bolts (5) .
Illustration 2 g01047417
Install check valve (3) and bolts (2). Connect hose assemblies (1) .
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01047806
Use a suitable lifting device to install gerotor motor (4). The weight of gerotor motor (4) is approximately 24 kg (55 lb). Install gerotor motor (4). Install bolts (5) .
Illustration 2 g01047417
Install check valve (3) and bolts (2). Connect hose assemblies (1) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pulley Caterpillar catalog:
1566998
PULLEY GP-CRANKSHAFT
3013, 3013C, 302.5, 303.5, C1.5, C2.2, CB-214D, CB-214E, CB-334D, CB-334E, CB-335D
3013, 3013C, 302.5, 303.5, C1.5, C2.2, CB-214D, CB-214E, CB-334D, CB-334E, CB-335D
3013C, C1.1, C1.5, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CC24B
2309051
PULLEY GP-CRANKSHAFT
3024C, C2.2
3024C, C2.2
2689184
PULLEY GP-CRANKSHAFT
3024C, C2.2
3024C, C2.2
2520120
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
2689236
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
2694272
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
2950888
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
3216738
PULLEY-CRANKSHAFT
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3014, 3024, 3024C, 304.5, 902, AP-255E, BB-621C, C2.2, CB-334D, CB-334E, CB-335D, CB-34, CB34B, CB34B XW, CC34B
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3014, 3024, 3024C, 304.5, 902, AP-255E, BB-621C, C2.2, CB-334D, CB-334E, CB-335D, CB-34, CB34B, CB34B XW, CC34B
1541822
PULLEY-WATER PUMP
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013, 3013C, 3014, 302.5, 3024, 3024C, 902, AP-255E, BB-621C, C1.5, C2.2, CB-214D, CB-214E, CB-334D, CB-334E, CB-335D, CB-34
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013, 3013C, 3014, 302.5, 3024, 3024C, 902, AP-255E, BB-621C, C1.5, C2.2, CB-214D, CB-214E, CB-334D, CB-334E, CB-335D, CB-34
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013C, 3024, 3024C, 3054C, 3054E, C1.5, C2.2, C3.3, CB-214E, CB-334E
Caterpillar
1992112
PULLEY GP-CRANKSHAFT
302.5C, 303
302.5C, 303
2520794
PULLEY GP-CRANKSHAFT
AD45B, AD55
AD45B, AD55
2797753
PULLEY GP-FAN DRIVE
320C, 320C FM, 321C
320C, 320C FM, 321C
2552879
PULLEY GP-FAN DRIVE
320C, 320C FM, 321C
320C, 320C FM, 321C
2552878
PULLEY GP-FAN DRIVE
320C, 320C FM, 321C
320C, 320C FM, 321C
2694272
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
2689236
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
2520120
PULLEY GP-WATER PUMP
3024C, C2.2
3024C, C2.2
2689184
PULLEY GP-CRANKSHAFT
3024C, C2.2
3024C, C2.2
2309051
PULLEY GP-CRANKSHAFT
3024C, C2.2
3024C, C2.2