PULLEY-FAN 2677507 - Caterpillar

Table 1
Crankshaft Positions for Valve Lash Setting
Standard Counterclockwise Rotation
Engine Stroke for the Number 1 Piston at Top Center Position (1) Inlet Valves Exhaust Valves
G3508 Compression Stroke 1-2-6-8 1-2-3-7
Exhaust Stroke 3-4-5-7 4-5-6-8
Firing Order 1-2-7-3-4-5-6-8
G3512 Compression Stroke 1-3-6-7-10-12 1-4-5-6-9-12
Exhaust Stroke 2-4-5-8-9-11 2-3-7-8-10-11
Firing Order 1-12-9-4-5-8-11-2-3-10-7-6
G3516 Compression Stroke 1-2-5-7-8-12-13-14 1-2-3-4-5-6-8-9
Exhaust Stroke 3-4-6-9-10-11-15-16 7-10-11-12-13-14-15-16
Firing Order 1-2-5-6-13-14-9-10-15-16-11-12-3-4-7-8
G3520 Compression Stroke 1-2-5-6-9-10-11-13-14-17-18 1-2-3-4-11-12-13-14-15-16
Exhaust Stroke 3-4-7-8-12-15-16-19-20 5-6-7-8-9-10-17-18-19-20
Firing Order 1-2-11-12-3-4-15-16-7-8-19-20-9-10-17-18-5-6-13-14
Crankshaft Positions For Valve Lash Setting
Optional Clockwise Rotation
G3508 Compression Stroke 1-3-4-8 1-2-7-8
Exhaust Stroke 2-5-6-7 3-4-5-6
Firing Order 1-8-7-2-6-5-4-3
G3512 Compression Stroke 1-3-4-6-7-12 1-4-5-8-9-12
Exhaust Stroke 2-5-8-9-10-11 2-3-6-7-10-11
Firing Order 1-4-9-8-5-2-11-10-3-6-7-12
G3516 Compression Stroke 1-2-5-6-7-8-13-14 1-2-3-4-5-6-9-10
Exhaust Stroke 3-4-9-10-11-12-15-16 7-8-11-12-13-14-15-16
Firing Order 1-6-5-4-3-10-9-16-15-12-11-14-13-8-7-2
G3520 Compression Stroke 1-2-5-6-9-11-12-13-14-17-18 1-2-5-6-9-11-12-13-14-17-18
Exhaust Stroke 3-4-7-8-10-15-16-19-20 5-6-7-9-10-14-17-18, 19-20
Firing Order 1-12-11-4-3-16-15-8-7-20-19-10-9-18-17-6-5-14-13-2
(1) Put the No. 1 Piston at the top center (TC) position and identify the correct stroke. Refer to Testing and Adjusting, "Finding the Top Center Position for the No. 1 Piston". Find the top center (TC) position for a particular stroke and make the adjustment for the correct cylinders. Remove the timing bolt. Turn the flywheel by 360 degrees in the direction of normal engine rotation. This will put the No. 1 piston at the top center (TC) position on the other stroke. Install the timing bolt in the flywheel and complete the adjustments for the cylinders that remain.