2683642 PULLEY-FAN DRIVE Caterpillar parts
3054C, 3054E, C4.4
Rating:
Alternative (cross code) number:
CA2683642
268-3642
2683642
CA2683642
268-3642
2683642
Weight: 2 pounds 0 kg.
INDUSTRIAL ENGINE,
Number on catalog scheme:
3
For full view, you need register
Information:
Correction Factor
To find the correction factor, look at the SIMS and owner's records, and the machine's record. Make an estimate of the average hours per month, and, then, talk to the owner or operator to find information, like down time, for the time since the last report or record. Adjust the estimate according to this information.
If a new Service Meter is installed, the correction factor will be the number of hours the machine was in operation before the new Service Meter is installed. To find this, make an estimate, through use of the above information, of the hours the machine has been in operation since the Service Meter failure and add these hours to the hours shown on the bad meter. This is the conversion factor. Write it in the shiny area on the decal.
If repairs have been made to the electrical circuit for the Service Meter, use the information to estimate the number of hours the machine was in operation during the time the Service Meter did not work. This is the conversion factor. Write it in the shiny area on the decal.
Service Meter Correction Decal, Form No. SEHS7785 installed on Service Meter.Installation Of Decal
Clean the face of the meter. Remove the center part of the decal. Remove the back paper and install the decal on the face of the meter.
Use Of Service Meter Correction Decal
To find the number of hours a machine has operated, add the conversion factor to the meter indication.
Important: Write A Sims Report After Installation Of Service Meter Correction Decal
It is important to write a SIMS report after installation of a Service Meter correction decal. In the "HOURS" space, write the total number of hours on the machine, including the conversion factor.
Under "PART NUMBER CAUSING PROBLEM," write the part number of the Service Meter which had a failure. Under "GROUP NUMBER CONTAINING PART," write the Gauge And Warning Group Number for the machine.
UNDER "OPTIONAL COMMENTS," write "HR CORR" and the conversion factor.
Write the remainder of the report as normally done.
To find the correction factor, look at the SIMS and owner's records, and the machine's record. Make an estimate of the average hours per month, and, then, talk to the owner or operator to find information, like down time, for the time since the last report or record. Adjust the estimate according to this information.
If a new Service Meter is installed, the correction factor will be the number of hours the machine was in operation before the new Service Meter is installed. To find this, make an estimate, through use of the above information, of the hours the machine has been in operation since the Service Meter failure and add these hours to the hours shown on the bad meter. This is the conversion factor. Write it in the shiny area on the decal.
If repairs have been made to the electrical circuit for the Service Meter, use the information to estimate the number of hours the machine was in operation during the time the Service Meter did not work. This is the conversion factor. Write it in the shiny area on the decal.
Service Meter Correction Decal, Form No. SEHS7785 installed on Service Meter.Installation Of Decal
Clean the face of the meter. Remove the center part of the decal. Remove the back paper and install the decal on the face of the meter.
Use Of Service Meter Correction Decal
To find the number of hours a machine has operated, add the conversion factor to the meter indication.
Important: Write A Sims Report After Installation Of Service Meter Correction Decal
It is important to write a SIMS report after installation of a Service Meter correction decal. In the "HOURS" space, write the total number of hours on the machine, including the conversion factor.
Under "PART NUMBER CAUSING PROBLEM," write the part number of the Service Meter which had a failure. Under "GROUP NUMBER CONTAINING PART," write the Gauge And Warning Group Number for the machine.
UNDER "OPTIONAL COMMENTS," write "HR CORR" and the conversion factor.
Write the remainder of the report as normally done.
Caterpillar parts catalog:
Parts pulley Caterpillar catalog:
3054, 3054B, 3054C, 3054E, 307, 312, 312B L, 312C, 315, 315B L, 315C, 317, 414E, 416B, 416C, 416D, 416E, 420D, 420E, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 436C,...
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013C, 3024, 3024C, 3054C, 3054E, C1.5, C2.2, C3.3, CB-214E, CB-334E
2384C, 2484C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 316E L, 318D2 L, 318E L, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, ...
2834148
PULLEY
312D2, 312D2 GC, 313D2, 318D2 L, 416F, 428F, 450F, AP-300D, C4.4, C4.4XQ100, C6.6, C7.1, CP-44, CS-44, D3K XL, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH...
312D2, 312D2 GC, 313D2, 318D2 L, 416F, 428F, 450F, AP-300D, C4.4, C4.4XQ100, C6.6, C7.1, CP-44, CS-44, D3K XL, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH...
1113297
PULLEY
3054, 3054B, 3054C, 3054E, 312, 315, 317, C3.3, C4.4, CS-323C, CS-423E, M313C, M315C
3054, 3054B, 3054C, 3054E, 312, 315, 317, C3.3, C4.4, CS-323C, CS-423E, M313C, M315C
3054C, 3054E, C4.4
2434300
PULLEY-ALTERNATOR
3024C, 3054C, 3054E, C2.2, C4.4
3024C, 3054C, 3054E, C2.2, C4.4
2463195
PULLEY
3054C, 3054E
3054C, 3054E
3054C, 3054E, C4.4, CS-323C, CS-423E, SPF343C
C4.4, C6.6, C7.1, CS-54
2843425
PULLEY-ALTERNATOR
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, C4.4, C6.6, CB-54B, CS-56B, CS-68B, CS-74B, CS-78B, CW-34
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, C4.4, C6.6, CB-54B, CS-56B, CS-68B, CS-74B, CS-78B, CW-34
3056E, 924G, 924GZ, 930G, IT28G
8Q1963
PULLEY-ALTERNATOR
621G, 623G, 627F, 627G, 651B, 657B, D10R, D8R II, D9R, SPS342
621G, 623G, 627F, 627G, 651B, 657B, D10R, D8R II, D9R, SPS342
7N1276
PULLEY-AUXILIARY DRIVE
D9L, SPS342
D9L, SPS342
2018651
PULLEY
3126B, AP-755
3126B, AP-755
2101556
PULLEY-FAN
3126B, 325C, M325C MH
3126B, 325C, M325C MH
4P3339
PULLEY AS
G3606, G3608, G3612
G3606, G3608, G3612
2416012
PULLEY
3044C, C3.4
3044C, C3.4
2416005
PULLEY
3044C, C3.4
3044C, C3.4
3054C, 3054E, C4.4, CS-323C, CS-423E, SPF343C
2463195
PULLEY
3054C, 3054E
3054C, 3054E