2P2408 PULLEY Caterpillar parts
950, D5B, D6C
Rating:
Alternative (cross code) number:
CA2P2408
2P-2408
2P2408
CA2P2408
2P-2408
2P2408
Weight: 31 pounds 14 kg.
Information:
DIAMETER OVER PINS
299.364
mm
GROOVE WIDTH
17.526
mm
NUMBER OF GROOVES
2
TRACK-TYPE TRACTOR, WHEEL LOADER,
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7587 Pry Bar 1
B 147-6456 Wedge Removal Tool 1 Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The valve bridges may need to be removed in order to remove the unit injectors. If the valve bridges are removed, the valve lash will need to be set during installation. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
Illustration 1 g01137288
Illustration 2 g01137290
Use Tooling (B) or a small flat head screwdriver to disconnect harness assembly (2) .
Remove socket head bolts (3) .
Place Tooling (A) at location (C) . Carefully remove unit injector (1) from the cylinder head.Note: Do not use a wire brush on the tip of the injector. Damage to the injector will occur.
Illustration 3 g01137291
Remove O-ring seals (6) , (7) , and (8) from unit injector (1) . Remove backup rings (4) , (5) , and (9) from unit injector (1) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7587 Pry Bar 1
B 147-6456 Wedge Removal Tool 1 Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The valve bridges may need to be removed in order to remove the unit injectors. If the valve bridges are removed, the valve lash will need to be set during installation. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
Illustration 1 g01137288
Illustration 2 g01137290
Use Tooling (B) or a small flat head screwdriver to disconnect harness assembly (2) .
Remove socket head bolts (3) .
Place Tooling (A) at location (C) . Carefully remove unit injector (1) from the cylinder head.Note: Do not use a wire brush on the tip of the injector. Damage to the injector will occur.
Illustration 3 g01137291
Remove O-ring seals (6) , (7) , and (8) from unit injector (1) . Remove backup rings (4) , (5) , and (9) from unit injector (1) .
Caterpillar parts catalog:
Parts pulley Caterpillar catalog:
120B, 14G, 215B, 518, 637D, 637E, 815, 920, 930, 941, 950, 951B, 966C, 977L, 980B, D5, D6C
120, 120G, 12F, 12G, 130G, 140, 140G, 14E, 14G, 160G, 215, 215B, 225, 235, 330, 330 FM L, 330 L, 330B, 330B L, 515, 518, 518C, 525, 528B, 530B, 627B, 814, 815, 816, 920, 930, 941, 950, 951B, 955K, 955...
120B, 140G, 330, 330 L, 330B L, 515, 517, 525, 527, 528B, 530B, 627B, 627E, 627F, 627G, 637D, 637E, 637G, 639D, 815, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 980B, D4D, D4E, D4H, D4H XL, D4HTSK III...
12F, 14E, 561C, 920, 941, 950, 955K, D4D, D5, D5B, D5E, D6C, D7G
215, 225, 235, 330 L, 330B L, 518, 572G, 627B, 637D, 920, 930, 941, 950, 955K, 955L, D4D, D4E, D5, D6C, D6D, D7G, D7G2, E300B
140G, 16, 627, 637D, D6C, D7G
D5, D5B, D5E, D6C
225, 235, 330 L, 330B, 517, 518, 545, D4D, D4E, D4H, D4H XL, D4HTSK III, D6C, D6D
572G, D6C, D7G, D7G2
D6C, D7G
6N2417
PULLEY ASSEMBLY
D5, D5B
D5, D5B
5S9515
PULLEY
941, 950, D4D, D6C
941, 950, D4D, D6C
120B, 140G, 330, 330 L, 330B L, 515, 517, 525, 527, 528B, 530B, 627B, 627E, 627F, 627G, 637D, 637E, 637G, 639D, 815, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 980B, D4D, D4E, D4H, D4H XL, D4HTSK III...
120, 120G, 12F, 12G, 130G, 140, 140G, 14E, 14G, 160G, 215, 215B, 225, 235, 330, 330 FM L, 330 L, 330B, 330B L, 515, 518, 518C, 525, 528B, 530B, 627B, 814, 815, 816, 920, 930, 941, 950, 951B, 955K, 955...
120B, 14G, 215B, 518, 637D, 637E, 815, 920, 930, 941, 950, 951B, 966C, 977L, 980B, D5, D6C
1P6359
PULLEY ASSEM.
773, 824B, 951B
773, 824B, 951B
4N4126
PULLEY
215B, 330, 330B L, 518C, 528, D4D, D4E, D5H, D6C
215B, 330, 330B L, 518C, 528, D4D, D4E, D5H, D6C
4N3188
PULLEY
621R, 815, 966C, D6C
621R, 815, 966C, D6C
4N3750
PULLEY
D6C
D6C
621R, D6C
215, 225, 235, 330 L, 330B L, 518, 572G, 627B, 637D, 920, 930, 941, 950, 955K, 955L, D4D, D4E, D5, D6C, D6D, D7G, D7G2, E300B
12F, 14E, 561C, 920, 941, 950, 955K, D4D, D5, D5B, D5E, D6C, D7G