PULLEY 2S4233 - Caterpillar

Intended Use
This machine is classified as a Skid Steer Loader with wheels or tracks as described in "EN ISO 6165:2012". This machine normally has a front mounted bucket or another work tool for the principle intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock, gravel, or agricultural products.Application/Configuration Restrictions
Refer to Operation and Maintenance Manual, "Machine Data" below for information about maximum machine weight.Refer to Operation and Maintenance Manual, "Caterpillar Approved Work Tools" for information about acceptable work tools.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.The maximum fore and aft slope for proper lubrication is 25 degrees continuous and 35 degrees intermittent. Intermittent time is 2 minutes.This machine is approved for use in environments with no explosive gases.Useful Life
The useful life of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machines useful life. The following items are required to obtain an economical useful life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.Machine Data
The specifications that are given herein describe the machine as the machine is manufactured by Caterpillar Inc. The machine is full of fluids. The machine is equipped with all options. The weight does not include the operator, work tools, or other attachments.
Table 1
Sales Model Maximum Machine Weight Length Width Height
226D 2665kg 2524mm 1497mm 2028mm
5875lb 99in 59in 80in
232D 2989kg 2523mm 1497mm 2029mm
6589lb 99in 59in 80in
236D 3544 kg 2792 mm 1676 mm 2120 mm
7814 lb 110 in 66 in 83 in
239D 3543kg 2522mm 1756mm 2034mm
7811lb 99in 69in 80in
242D 3616 kg 2792 mm 1676 mm 2120 mm
7973 lb 110 in 66 in 83 in
246D 4005 kg 3000 mm 1829 mm 2120 mm
8828 lb 118 in 72 in 83 in
249D 3723kg 2523mm 1756mm 2039mm
8207lb 99in 69in 80in
257D 3775 kg 2721 mm 1676 mm 2120 mm
8322 lb 107 in 66 in 83 in
262D 4232 kg 3000 mm 1829 mm 2120 mm
9329 lb 118 in 72 in 83 in
259D 4271 kg 2780 mm 1676 mm 2120 mm
9416 lb 109 in 66 in 83 in
272D 4459 kg 2967 mm 1829 mm 2120 mm
9830 lb 117 in 72 in 83 in
272D2 4574kg 3242 mm 1829 mm 2094 mm
10084 lb 128 in 72 in 82 in
272D XHP 4646 kg 2967 mm 1930 mm 2120 mm
10242 lb 117 in 76 in 83 in
272D2 XHP 4327 kg 3226 mm 1930 mm 2133 mm
9540 lb 127 in 76 in 84 in
277D 4459 kg 2967 mm