PULLEY-CRANKSHAFT 3017505 - Caterpillar

Illustration 1 g06092019
Illustration 2 g00037860
Typical example
By using a path of the lift arm, the primary access to the operator station is from the left-hand Side of the machine.Mount the machine and dismount the machine only at locations that have steps and/or handholds. Before you mount the machine, clean the steps and the handholds. Inspect the steps and handholds. Make all necessary repairs.Face the machine whenever you get on the machine and whenever you get off the machine.Maintain a three-point contact with the steps and with the handholds.Note: Three-point contact can be 2 feet and one hand. Three-point contact can also be 1 foot and two hands.Do not mount a moving machine. Do not dismount a moving machine. Never jump off the machine. Do not carry tools or supplies when you try to mount the machine or when you try to dismount the machine. Use a hand line to pull equipment onto the platform. Do not use any controls as handholds when you enter the operator compartment or when you exit the operator compartment.Alternate Exit
Machines that are equipped with cabs have alternate exits. For additional information, see Operation and Maintenance Manual, "Alternate Exit".