3109538 PULLEY AS Caterpillar parts
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR
Rating:
Alternative (cross code) number:
CA3109538
310-9538
3109538
CA3109538
310-9538
3109538
Weight: 15 pounds 7 kg.
EXCAVATOR,
Compatible equipment models: 3109538:
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Illustration 1 g01078624
Remove drain plug (2) and drain plug (6). Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change". Remove the O-ring seal from the drain plugs.
Remove bolts (1) that fasten engine oil pan (4) to the cylinder block.
Remove engine oil pan (4) from the cylinder block.
Remove isolation seal (5) from the cylinder block and the engine oil pan.
Remove plug (3). Remove the O-ring seal from the plug. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the sealing surface of the engine oil pan, cylinder block, housing (front), and the flywheel housing.
Illustration 2 g01078624
Install isolation seal (5) on engine oil pan (4).
Put engine oil pan (4) in position and install bolts (1).
Install the O-ring seal and drain plug (2). Install the O-ring seal and drain plug (6). Tighten drain plugs (2) and (6) to a torque of 70 15 N m (52 11 lb ft).
Install the O-ring seal and plug (3). Tighten plug (3) to a torque of 90 15 N m (66 11 lb ft).
Fill the engine oil pan to the correct level that is indicated on the engine oil level gauge. Refer to the Operation and Maintenance Manual, "Refill Capacities and Recommendations" for the lubrication system capacity of the engine.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Illustration 1 g01078624
Remove drain plug (2) and drain plug (6). Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change". Remove the O-ring seal from the drain plugs.
Remove bolts (1) that fasten engine oil pan (4) to the cylinder block.
Remove engine oil pan (4) from the cylinder block.
Remove isolation seal (5) from the cylinder block and the engine oil pan.
Remove plug (3). Remove the O-ring seal from the plug. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the sealing surface of the engine oil pan, cylinder block, housing (front), and the flywheel housing.
Illustration 2 g01078624
Install isolation seal (5) on engine oil pan (4).
Put engine oil pan (4) in position and install bolts (1).
Install the O-ring seal and drain plug (2). Install the O-ring seal and drain plug (6). Tighten drain plugs (2) and (6) to a torque of 70 15 N m (52 11 lb ft).
Install the O-ring seal and plug (3). Tighten plug (3) to a torque of 90 15 N m (66 11 lb ft).
Fill the engine oil pan to the correct level that is indicated on the engine oil level gauge. Refer to the Operation and Maintenance Manual, "Refill Capacities and Recommendations" for the lubrication system capacity of the engine.
Caterpillar parts catalog:
Parts pulley Caterpillar catalog:
311D LRR, 312C L, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D L, 319D LN, 320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
3109776
PULLEY GP-FAN & ALT DRIVE
314D CR, 314D LCR
314D CR, 314D LCR
3054944
PULLEY GP-FAN & ALT DRIVE
311D LRR, 312D, 312D L, 313D, 314D LCR
311D LRR, 312D, 312D L, 313D, 314D LCR
311B, 311C, 311D LRR, 312, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C...
311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314D CR, 314D LCR, 315C, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D...
1189863
PULLEY
311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 314C, 314D CR, 314D LCR, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, ...
311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 314C, 314D CR, 314D LCR, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, ...
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L,...
3109541
PULLEY
311D LRR, 312D, 312D L, 313D, 314D LCR
311D LRR, 312D, 312D L, 313D, 314D LCR
3109694
PULLEY
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
3109591
PULLEY
311D LRR, 312D, 312D L, 314D CR, 314D LCR
311D LRR, 312D, 312D L, 314D CR, 314D LCR
3109777
PULLEY
314D CR, 314D LCR
314D CR, 314D LCR
2797767
PULLEY GP-ALTERNATOR
312D L
312D L
2964731
PULLEY
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
2964712
PULLEY AS
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L,...
3214914
PULLEY
307D, 308D
307D, 308D
3214913
PULLEY
307D, 308D
307D, 308D
2706220
PULLEY-CRANKSHAFT
304C CR, 305.5D, 305C CR, 305D CR, 904B, 904H
304C CR, 305.5D, 305C CR, 305D CR, 904B, 904H
235B, 572R, D6R, D7R
2797767
PULLEY GP-ALTERNATOR
312D L
312D L
3109777
PULLEY
314D CR, 314D LCR
314D CR, 314D LCR
3109591
PULLEY
311D LRR, 312D, 312D L, 314D CR, 314D LCR
311D LRR, 312D, 312D L, 314D CR, 314D LCR
3109694
PULLEY
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
3109541
PULLEY
311D LRR, 312D, 312D L, 313D, 314D LCR
311D LRR, 312D, 312D L, 313D, 314D LCR