3323882 PULLEY Caterpillar parts
324E L, 324E LN, 329E, 329E L, 329E LN
Rating:
Alternative (cross code) number:
CA3323882
332-3882
3323882
CA3323882
332-3882
3323882
Weight: 4 pounds 1 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes
WIDIA WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes || M1200 FACE MILL D6.000 Z16 || When you buy WIDIA products, you are buying the ultimate in performance and tool life.
WIDIA WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes || M1200 FACE MILL D6.000 Z16 || When you buy WIDIA products, you are buying the ultimate in performance and tool life.
WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes
WIDIA WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes || M1200 FACE MILL D6.000 Z16 || When you buy WIDIA products, you are buying the ultimate in performance and tool life.
WIDIA WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes || M1200 FACE MILL D6.000 Z16 || When you buy WIDIA products, you are buying the ultimate in performance and tool life.
WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes
WIDIA WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes || M1200 FACE MILL D6.000 Z16 || When you buy WIDIA products, you are buying the ultimate in performance and tool life.
WIDIA WIDIA 3323882 Face Mills M1200 Series Inch End Mill 2.0000 Inch Dia, 0.1770 Inch Max Depth, 2.3800" Length, A-Socket Head Cap Screw Shell Mill Steel 16 Flutes || M1200 FACE MILL D6.000 Z16 || When you buy WIDIA products, you are buying the ultimate in performance and tool life.
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 3323882:
Information:
988B (50W)
1. Remove disconnect switch (1) from plate (2) and remove plate (2) from the frame. 2. Install plate (3) to the frame and install disconnect switch (1) to plate (3). 3. Fasten receptacle (4) to plate (3) with two 8S4211 Plates (5), four bolts and washers.4. Use straps (6) as needed to hold the cables. 5. Cut panel (7) to the dimensions shown for access to receptacle (4).992C (42X)
1. Weld strip (1) to brace (2) to the dimensions shown with 6.350 mm (0.25") fillet welds all around. 2. Fasten bracket (3) to strip (1) with two bolts and washers.3. Install receptacle (4) to bracket (3).4. Fasten the cables to the existing cables with four straps (5).631D (24W, 66W), 633D (25W), 637D (26W, 27W, 71W)
1. Put the plastic tape (1) around the red cable so there is a 1.524 mm (0.06") gap between turns and cover 50.8 mm (2") of each end of the cable with plastic tape.2. Install receptacle (2) to step (3) with four bolts, nuts and washers.3. Put cables (4) and (5) through tube (6). 4. Remove two bolts and fasten tube (6) to the platform with two clips (7), spacers (8) and the two bolts that were removed.5. Fasten cables (4) and (5) with two 2G1476 Clamps (9) and plate (10) to the inside of the right frame.6. Remove four clips and fasten the cables with four new clips (11).621B (45P1985-Up), 627B (14S765-Up, 15S900-Up)
1. Weld lug (1) to hydraulic tank (2); if equipped with hood and door attachment, weld to bracket (3). For machines that are not equipped with 8F9836 Lug (1), order the lug from the Parts Department. 2. Use 5.080 mm (0.20') fillet welds to fasten lug (1) to hydraulic tank (2) or bracket (3), at the dimensions shown. 3. Install 6G6043 Bracket (4), under handle (5); fasten 4N6579 Receptacle (6) and 8S2634 Cover (7) to bracket (4) with four 2J3118 Bolts, 5M2894 Washers and 1D4717 Nuts.4. Put 5P0706 Wrap (8) around the red cable. 5. Fasten the cables with 6G2256 Clamps (9), 6G2263 Spacer, two 2G8767 Washers, 5D9844 Bolt and 5M2894 Washers.621B (45P1985-Up), 627B (14S765-Up)
6. Connect the black cable to starter (10) and the red
1. Remove disconnect switch (1) from plate (2) and remove plate (2) from the frame. 2. Install plate (3) to the frame and install disconnect switch (1) to plate (3). 3. Fasten receptacle (4) to plate (3) with two 8S4211 Plates (5), four bolts and washers.4. Use straps (6) as needed to hold the cables. 5. Cut panel (7) to the dimensions shown for access to receptacle (4).992C (42X)
1. Weld strip (1) to brace (2) to the dimensions shown with 6.350 mm (0.25") fillet welds all around. 2. Fasten bracket (3) to strip (1) with two bolts and washers.3. Install receptacle (4) to bracket (3).4. Fasten the cables to the existing cables with four straps (5).631D (24W, 66W), 633D (25W), 637D (26W, 27W, 71W)
1. Put the plastic tape (1) around the red cable so there is a 1.524 mm (0.06") gap between turns and cover 50.8 mm (2") of each end of the cable with plastic tape.2. Install receptacle (2) to step (3) with four bolts, nuts and washers.3. Put cables (4) and (5) through tube (6). 4. Remove two bolts and fasten tube (6) to the platform with two clips (7), spacers (8) and the two bolts that were removed.5. Fasten cables (4) and (5) with two 2G1476 Clamps (9) and plate (10) to the inside of the right frame.6. Remove four clips and fasten the cables with four new clips (11).621B (45P1985-Up), 627B (14S765-Up, 15S900-Up)
1. Weld lug (1) to hydraulic tank (2); if equipped with hood and door attachment, weld to bracket (3). For machines that are not equipped with 8F9836 Lug (1), order the lug from the Parts Department. 2. Use 5.080 mm (0.20') fillet welds to fasten lug (1) to hydraulic tank (2) or bracket (3), at the dimensions shown. 3. Install 6G6043 Bracket (4), under handle (5); fasten 4N6579 Receptacle (6) and 8S2634 Cover (7) to bracket (4) with four 2J3118 Bolts, 5M2894 Washers and 1D4717 Nuts.4. Put 5P0706 Wrap (8) around the red cable. 5. Fasten the cables with 6G2256 Clamps (9), 6G2263 Spacer, two 2G8767 Washers, 5D9844 Bolt and 5M2894 Washers.621B (45P1985-Up), 627B (14S765-Up)
6. Connect the black cable to starter (10) and the red
Caterpillar parts catalog:
Parts pulley Caterpillar catalog:
3244551
PULLEY GP-ENGINE
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LRR, 323D L, 324E, 324E L, 329E, 329E L
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LRR, 323D L, 324E, 324E L, 329E, 329E L
3513355
PULLEY GP-CRANKSHAFT
324E, 324E L, 324E LN, 329E, 329E L, 329E LN, C7.1
324E, 324E L, 324E LN, 329E, 329E L, 329E LN, C7.1
3244558
PULLEY GP-ENGINE
324E L, 324E LN, 329E, 329E L, 329E LN
324E L, 324E LN, 329E, 329E L, 329E LN
3452568
PULLEY
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, C7.1
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, C7.1
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3295255
PULLEY
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LRR, 323D L, 324E, 324E L, 329E, 329E L
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LRR, 323D L, 324E, 324E L, 329E, 329E L
3295255
PULLEY
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LRR, 323D L, 324E, 324E L, 329E, 329E L
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E L, 320E LRR, 323D L, 324E, 324E L, 329E, 329E L
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3630255
PULLEY-FAN
521B, 522B
521B, 522B
4361883
PULLEY AS
320D, 320D L, 321D LCR, 323D L
320D, 320D L, 321D LCR, 323D L
3277221
PULLEY AS
320D, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L
320D, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L
4433951
PULLEY
320D FM
320D FM
320, 320 L
2686934
PULLEY
320C
320C
9Y1742
PULLEY
320 L, E120B
320 L, E120B
3295239
PULLEY
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L