PULLEY-FAN 3577848 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     FT-2376     Plate     1    
FT-2377 Plate     1    
6V-0113 Hydraulic Cylinder     1    
5P-8712 Bushing     1    
1P-0544 Nut     2    
5P-8714 Stud     1    
4C-9634 Stud     1    
5P-8623 Adapter     1    
8S-7645 Hose     1    
4C-4865 Hydraulic Pump     1    Note: Verify that all of the components of the trunnion support are clean and free of foreign material prior to installation.Note: Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.Note: Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00620097
Install two dowels (4) to the support.
Illustration 2 g00620074
Install two grease fittings (3) to the support.
Illustration 3 g00620076
Use Tooling (A) to install bearing (2) to the support. Remove Tooling (A) from the support.
Illustration 4 g00620073
Install ring (1) to the support.End By: Install the rear trunnion. Refer to Disassembly and Assembly, "Trunnion Support (Oscillating Axle, Rear) - Install".