3687801 PULLEY-CRANKSHAFT Caterpillar parts
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, TH48-E80
Rating:
Alternative (cross code) number:
CA3687801
368-7801
3687801
CA3687801
368-7801
3687801
GAS ENGINE, VEHICULAR ENGINE,
This part in 5 request:
Show.
This information for suppliers only!
2021-07-15
2021-07-15
2021-04-13
2021-04-13
2017-04-05
Compatible equipment models: 3687801:
PETROLEUM TRANSMISSION
TH48-E80
Information:
Removal Procedure
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g06014883
Disconnect tube assembly (4).
Remove clamp assembly (1).Note: Clamp assembly (3) is a one time use part. Discard the clamp assembly if the clamp is loosened.
Remove clamp assembly (3) and position the tube assembly out of the way. Discard clamp assembly (3).
Remove bolts (2) and remove the tube assembly.
Illustration 2 g06014884Note: Clamp assembly (6) is a one time use part. Discard the clamp assembly if the clamp is loosened.
Remove clamp assembly (6) and discard the clamp assembly.
Remove clamp assembly (5).
Remove bolts (8) and remove tube assembly (7).
Illustration 3 g06014886
Remove bolts (10). The weight of exhaust cooler (9) is approximately 17 kg (37 lb). Remove exhaust cooler (9).
Repeat 1 through 9 for the opposite side.Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary
Install exhaust cooler (9) in the reverse order.
Tighten clamp assemblies (6) and (3) to a torque of 7.5 1 N m (66 9 lb in).
Lubricate the O-ring seals that are found on tube assemblies (7) and (2) with the lubricant that is being sealed.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g06014883
Disconnect tube assembly (4).
Remove clamp assembly (1).Note: Clamp assembly (3) is a one time use part. Discard the clamp assembly if the clamp is loosened.
Remove clamp assembly (3) and position the tube assembly out of the way. Discard clamp assembly (3).
Remove bolts (2) and remove the tube assembly.
Illustration 2 g06014884Note: Clamp assembly (6) is a one time use part. Discard the clamp assembly if the clamp is loosened.
Remove clamp assembly (6) and discard the clamp assembly.
Remove clamp assembly (5).
Remove bolts (8) and remove tube assembly (7).
Illustration 3 g06014886
Remove bolts (10). The weight of exhaust cooler (9) is approximately 17 kg (37 lb). Remove exhaust cooler (9).
Repeat 1 through 9 for the opposite side.Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary
Install exhaust cooler (9) in the reverse order.
Tighten clamp assemblies (6) and (3) to a torque of 7.5 1 N m (66 9 lb in).
Lubricate the O-ring seals that are found on tube assemblies (7) and (2) with the lubricant that is being sealed.
Cat SIS web machinery list:
Parts pulley Caterpillar catalog:
3803930
PULLEY GP-AUXILIARY DRIVE
3508C, 3512C, 3516C
3508C, 3512C, 3516C
7E4838
PULLEY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C, 793D, 797, 797B, 854G, 992G, 994, 994D...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C, 793D, 797, 797B, 854G, 992G, 994, 994D...
7E4839
PULLEY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B...
8N9411
PULLEY
3508, 3512, 3516, 776C, 776D, 777, 777B, 777C, 777D, 777F, 777G
3508, 3512, 3516, 776C, 776D, 777, 777B, 777C, 777D, 777F, 777G
8N6566
PULLEY (crankshaft)
3508, 3516
3508, 3516
8N6573
PULLEY (fan)
3516
3516
8N6577
PULLEY (fan)
3516
3516
8N6562
PULLEY (crankshaft)
3512, 3516, 777B
3512, 3516, 777B
8N6565
PULLEY (crankshaft)
3512, 3516
3512, 3516
7C0864
PULLEY-IDLER
3508, 3512, 3516
3508, 3512, 3516
7W6825
PULLEY-ALTERNATOR
3508, 3512, 3516
3508, 3512, 3516
2168512
PULLEY
G3508, G3508B, G3512, G3512B, G3516, G3520B
G3508, G3508B, G3512, G3512B, G3516, G3520B
3687808
PULLEY-CRANKSHAFT
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, TH48-E80
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, TH48-E80
3008569
PULLEY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 79...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 79...
3008570
PULLEY AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 79...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 79...
7E4839
PULLEY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B...
7E4838
PULLEY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C, 793D, 797, 797B, 854G, 992G, 994, 994D...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C, 793D, 797, 797B, 854G, 992G, 994, 994D...
7E4840
PULLEY AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C, 854G, 992G, 994, 994F, G3508, G3512, G...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C, 854G, 992G, 994, 994F, G3508, G3512, G...
1004954
PULLEY
3116, 3126
3116, 3126
2916237
PULLEY
3114, 3116, 3126, 3126B, C-9, C7, C9, CX31-C9I, TH31-E61
3114, 3116, 3126, 3126B, C-9, C7, C9, CX31-C9I, TH31-E61
1152018
PULLEY
3116, 3126
3116, 3126
7C6380
PULLEY
3114, 3116
3114, 3116
7N5626
PULLEY
3508, 3512, 3516, 789, D11N, G3512, G3516
3508, 3512, 3516, 789, D11N, G3512, G3516
7N8011
PULLEY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3508B, G3512, G3516, G3516B, G3520B, PM3508, PM3512, PM3516, TH48-E80
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3508B, G3512, G3516, G3516B, G3520B, PM3508, PM3512, PM3516, TH48-E80