AVSPARE.COM
parts catalog

PULLEY-IDLER 4416059 - Caterpillar



4416059 PULLEY-IDLER Caterpillar parts PULLEY
Rating:
26
Alternative (cross code) number:
CA4416059
441-6059
4416059
Caterpillar 4416059 PULLEY-IDLER
Weight: 24 pounds 10 kg.

Buy PULLEY-IDLER 4416059 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 12
 
  For full view, you need register

Information:

Installation Of Self-Sealing Probe Adapter
1. The earlier probe adapter had flats on the seal retainer. The current seal retainer does NOT have flats on it. The flats were removed to help prevent accidental removal of the seal retainer. The seal retainer is installed during assembly with a thread lock material and tightened to a specific torque. Prior to installation, check probe adapters for a loose seal retainer by removing the plug. The seal retainer should not move as the plug is removed. DO NOT use adapters that have a loose retainer. Do not attempt to retighten a seal retainer that has come loose because the seal between the seal retainer and bladder will be damaged.2. The seal bladder is punctured during manufacturing with a sharp instrument. Make sure that the seal bladder has been prepunctured before installation by lubricating a clean, smooth probe and inserting the probe into the adapter. Look at the bladder while inserting the probe. A prepunctured bladder will have an obvious opening on the surface and very little force will be required to insert the probe through the bladder. DO NOT use an adapter that has NOT been prepunctured. Do not attempt to puncture a bladder that has not been prepunctured. To do so may damage the seal between the seal retainer and the bladder and also tear the bladder which will cause the adapter to leak when it is installed.3. Remove the probe and reinstall the plug. Tighten the plug enough to hold it in place.4. Install the probe adapter on the machine. This should be done while the machine is shut down, cool and

Caterpillar parts catalog:

Caterpillar parts catalog
3516E Generator Set JH800001-UP
3516E Generator Set GWZ00001-UP
3516C Generator Set GBZ00001-UP
3516C Generator Set SEK00001-UP
3516C Generator Set SKC00001-UP
3516C Generator Set SFK00001-UP
3516E Generator Set LCK00001-UP
G3520 Generator Set E2J00001-UP
G3520 Generator Set E2900001-UP


Parts pulley Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.