7C6349 PULLEY-ALTERNATOR Caterpillar parts
3114, 3116, 3126
Rating:
Alternative (cross code) number:
CA7C6349
7C-6349
7C6349
CA7C6349
7C-6349
7C6349
Weight: 2 pounds 0 kg.
Information:
CENTERLINE OF SPACING
27.06
mm
FINISHED ID
15.964
mm
GROOVE WIDTH
12.7
mm
KEYWAY WIDTH
3.226
mm
NUMBER OF GROOVES
2
OD
95
mm
INDUSTRIAL ENGINE,
Number on catalog scheme:
11
For full view, you need register
Information:
Separation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Start By:
Separate the transmission from the output transfer gear case. Refer to Disassembly and Assembly, "Transmission from Output Transfer Gears - Separate". Note: Cleanliness is an important factor. Before you begin the disassembly procedure, thoroughly clean the exterior of the components. thoroughly cleaning will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g03320038
Install Tooling A and attach a suitable lifting device to input drive (2). The weight of the input drive assembly is approximately 102 kg (225 lb).
Remove 15 bolts (3). Note: Use two bolts (3) as jacking bolts in order to separate input drive (2) from transmission (1).
Separate input drive (2) from transmission (1).
Illustration 2 g02175597
Remove three O-ring seals (4).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Start By:
Separate the transmission from the output transfer gear case. Refer to Disassembly and Assembly, "Transmission from Output Transfer Gears - Separate". Note: Cleanliness is an important factor. Before you begin the disassembly procedure, thoroughly clean the exterior of the components. thoroughly cleaning will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g03320038
Install Tooling A and attach a suitable lifting device to input drive (2). The weight of the input drive assembly is approximately 102 kg (225 lb).
Remove 15 bolts (3). Note: Use two bolts (3) as jacking bolts in order to separate input drive (2) from transmission (1).
Separate input drive (2) from transmission (1).
Illustration 2 g02175597
Remove three O-ring seals (4).
Caterpillar parts catalog:
Parts pulley Caterpillar catalog:
205B, 214B, 3114, 3116, 3126, 3306, 3306B, 910E, 918F, 924F, 928F, 938F, 938G, AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C, CB-434, CB-634, CB-634C, CP-563, CS-531, CS-531C, CS-533, CS-533C, CS-563...
3114, 3116, 3126, 3126B, 613C II, 950F, 953B, 953C, 963B, 963C, D8L, D9N, D9R
214B, 3114, 3116, 3126, 3126B, 550, 570, 574, 580, 613C II, 950F, 950F II, 953B, 953C, 960F, 962G, 963B, AP-1000, AP-1050, BG-2455C, BG-245C, CB-434, CB-634C, CB-634D, CP-563, CS-531C, CS-533C, CS-563...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574,...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 5...
3114, 3116, 3126, 533, 543, 918F, 924F, 950G, AP-1000, AP-1000B, AP-1050, AP-1055B, BG-2455C, BG-245C, CB-434, CB-634C, CB-634D, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-583C, D250D, IT12B, IT24...
3116, 3126, 3304, 3304B, 3306, 3306B, 330B L, 637D, CB-534, D250B, D250E, D250E II, D25C, D25D, D300B, D300D, D300E, D300E II, D30C, D350C, D35C, G3304B, G3306B
120H, 120H ES, 120H NA, 135H, 135H NA, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446, 446B, 446D, 45, 525B, 535B, 539, 550, 561M, 570, 574, 580, 613C II, 814F I...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 30/30, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 535B, 539, 55, 550, 561M, ...
3116, 950F, CP-563, E200B, IT12B
7E4193
PULLEY
3116, 3126, D250D
3116, 3126, D250D
1166838
PULLEY
3116, 3126
3116, 3126
7E3289
PULLEY
3116
3116
9Y4653
PULLEY-FAN DRIVE
3116, 3126, 561M, D5M, D6M, IT12B
3116, 3126, 561M, D5M, D6M, IT12B
206B, 214B, 3114, 3116, 3126, 539, 928G, 938G, 950G, 953C, 962G, CB-434, CP-563, E240C, EL240B, IT28G, IT38G, IT62G, M318, M320
3114, 3116, 3126, 3126B, C-9, C7, C9, CX31-C9I, TH31-E61
3116, 3126, 3126B, 3126E, C7
213B, 214B, 3116, 320 L, 325, 325B, 910E, 918F, 928F, 938F, CS-533, D5M, IT12B
9Y3290
PULLEY
3116
3116
7E6783
PULLEY
3176, 3176B
3176, 3176B
9Y3467
PULLEY
3176, 3176B
3176, 3176B
3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B L, 725, 730, C-10, C-12, W345B II