PULLEY-FAN 7N4422 - Caterpillar

Electrocution (3)
This safety message is on the enclosure for the circuit breaker and also on both sides of the enclosure.
Illustration 8 g01392482
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Do not connect generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution system can occur and could cause personal injury or death.Open and secure main distribution system switch, or if the connection is permanent, install a double throw transfer switch to prevent electrical feedback. Some generators are specifically approved by a utility to run in parallel with the distribution system and isolation may not be required. Always check with your utility as to the applicable circumstances.
Hot Surface (4)This safety message is on the top and sides of the enclosure, as well as near the exhaust, and on the aftercooler.
Illustration 9 g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Crush (5)This safety message is on the sides of enclosed generator sets. This safety message is also on the base for open generator sets.
Illustration 10 g01433231
Crushing hazard! Read and understand the instructions and warnings in the Operation and Maintenance manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Electrical Shock (6)The safety message for electrical shock is on the enclosure for the control panel.
Illustration 11 g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
No Step (7)The safety message for do not step is on top of the enclosure near both sides.
Illustration 12 g00989364
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Hot Fluid Under Pressure (8)This safety message is located by the cooling system filler cap.
Illustration 13 g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.