PULLEY GP-CRANKSHAFT 7W2336 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of fluids according to local regulations and mandates.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This will help prevent fluid loss and this will help to prevent contaminants from entering the system. Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. The torque converter outlet relief valve is located on the left side of the torque converter. 1. Disconnect the wiring harness from transmission oil temperature sender (1) and remove the sender from the torque converter outlet relief valve.2. Disconnect hose assembly (3) from the torque converter outlet relief valve.3. Remove three bolts (2) and remove torque converter outlet relief valve (4) from the torque converter housing.