PUMP GP-GR 4 BSC 0R1035 - Caterpillar

1. Loosen hose clamp (1), and remove hose (2) from the breather.2. Remove the bolt and breather from the valve cover.3. Remove bolts (4) and valve cover (3) from the engine. The following steps are for installation of the valve cover. 4. Install a new gasket on the valve cover if needed. Use 5H2471 Cement to hold the new gasket to the valve cover.5. Put valve cover (3) in position on the cylinder head, and install bolts (4) that hold it in place. Tighten the bolts in the number sequence shown to a torque of 11 3 N m (96 24 lb in).6. Make sure the O-ring seal is in position in the breather. Put the breather in position on the valve cover, and install the bolt that holds it in place. Tighten the bolt to a torque of 14 3 N m (120 24 lb in).7. Install hose (2) on the breather, and tighten hose clamp (1).End By:a. install air cleaner assembly