PUMP GP-HYD 0R3458 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
D6T LGP PAT EJJ00300-00304
KSB01125-01153, 1155, 1157-1621, 1623
D6T XW PAT RCW01100-01256, 1258-1384, 1386-1411, 1413, 1415
RRK00300-00302
PARTS NEEDED
Qty
Part Number Description
4 8T4139 BOLT-HEX HEAD
4 8T4183 BOLT-HEX HEAD
12 8T4223 WASHER-HARD
4 8T4244 NUT-HEX
2 2167558 CLIP-2 PIECE
2 4443536 GUARD AS
2 4443537 CLAMP AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-3500 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.5-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Remove both angle cylinder 341-1392 Guards and the 260-1797 and 216-7558 Clamp Sets from the machine. Do not reuse the old guard assemblies, clamp sets, and hardware.
2. Install new 444-3536 Guard Assemblies and the new 444-3537 and 216-7558 Clamp sets. The new guards and clamps move the clamp further forward along the cylinder, increasing the clearance to the track.