PUMP GP-FUEL 0R4968 - Caterpillar

(1) Torque for nuts on trunnions ... 1220 70 N m (900 50 lb ft)(2) Tightening procedure for four bolts: First torque in sequence A, B, C, D ... 200 15 N m (150 10 lb ft)After first bolt torque, turn each bolt in sequence A, B, C, D an additional ... 120° 5°(3) Torque for bolts ... 150 20 N m (110 15 lb ft)Blade Cutting Edge Angle Adjustment
Add or remove spacers (4) to change the blade cutting edge angle.Thickness of 8E3308 Spacer ... 25 mm (1.0 in)Thickness of 8E3315 Spacer ... 12 mm (.5 in)Assembling the blade with two 8E3308 and two 8E3315 Spacers will give a blade cutting edge angle of ... 56° 2°Assembling the blade with two 8E3315 Spacers will give a blade cutting edge angle of ... 60° 2°Assembling the blade with no spacers will give a blade cutting edge angle of ... 62° 2°The standard cutting edge for the blade is ... 60° 2°