PUMP GP-AUX 0R7728 - Caterpillar

2. Remove bolt (2), spacer (3), clip and two tubes (4). 3. Remove bolts (5) and remove oil filter base. The following steps are for installation of the oil filter base.4. Position filter base and install bolts (5).5. Position two tubes (4), clip and spacer (3), then install bolts (2).6. Install oil filter (1).Disassemble And Assemble Oil Filter Base
Start By: a. remove oil filter base 1. Remove bolts (1), covers (2) and (5) from the oil filter base.2. Remove the springs and plungers from the oil filter base.3. Make sure all of the parts are clean and put clean engine oil on them.4. Install plunger (4), spring (3), cover (2) and bolts (1) of the bypass valve for the oil cooler in the oil filter base.5. Install plunger (7), spring (6), cover (5) and bolts of the bypass valve for the oil filter in the oil filter base.End By: a. install oil filter base